|

Vancouver falls down the list of top cities in the world for 2025

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

Vancouver is known around the world thanks to top attractions like the Honda Celebration of Light and award-winning dining spots. However, a new ranking has revealed the city is slipping a bit compared to its peers.

The Oxford Economics Global Cities Index has released its report for 2025, which is a holistic ranking of the 1,000 cities included in its Global Cities Forecasting Service.

Cities are scored across five categories to achieve a well-rounded comparison of locations. The five categories are Economics, Human Capital, Quality of Life, Environment, and Governance.

Vancouver has made the list once again this year; however, it has slipped a few spots down the newest global ranking.

Vancouver

Vancouver came in 20th place last year, ranking 35th in economics, 33rd in human capital, 78th in quality of life, 149th in environment, and 52nd in governance.

In 2025, Vancouver dropped 17 places to land in 37th place, with rankings dipping in three categories: 53rd in economics, 52nd in human capital, and 186th in quality of life.

However, the city’s score jumped in two categories: it ranked 61st in environment and 27th in governance.

“Arguably one of the most picturesque cities in the world, it is no surprise that Vancouver is such an attractive location for many Canadians and international migrants,” wrote Oxford Economics Global Cities Index in its report. “For those who can handle the steep housing costs, there are few other cities that can match Vancouver’s economic strength and human capital.”

Vancouver

The Global Cities Index covers the 1,000 largest cities in the world, which are located in 163 different countries, including 103 cities in Canada.

Toronto ranked as the highest city in Canada on the list at #20, with Montreal coming in at #43, and Ottawa-Gatineau at #88.

Calgary landed in #50 and Edmonton settled even further down on the list, coming in at #131.

You can check out the full ranking online.

Share this page

Similar Posts

  • | |

    A market made for buyers is missing buyers

    Real Estate Market Report for March 2025 Home sales registered on the MLS® in Metro Vancouver for March were the lowest since 2019 for the same month, while active listings continued their upward trend. Sales The Greater Vancouver REALTORS® (GVR) reports that residential sales in the region totalled 2,091 in March 2025, a 13.4 percent…

    Share this page
  • | | | |

    Buying a Foreclosure Home in Canada

    If you are interested to have access to all Vancouver Foreclosures MLS® Listings, please click on the “VIP Insider Access” button. In the “Notes” box include the code “Foreclosures” or visit Vancouver Foreclosures and register What You Should Know Foreclosed homes are typically homes put on sale by lenders after the previous buyer defaults on their mortgage. Foreclosures are rare…

    Share this page
  • | | | |

    3 Things I Learned Hanging Grasscloth Wallpaperand 1 Big Mistake to Avoid

    Grasscloth wallpaper is notoriously difficult to install. Real grasscloth wallpaper is made from natural fibers like jute, hemp, arrowroot, or seagrass, which are handwoven and backed with paper. The organic construction is super fragile (it tears more easily than vinyl or synthetic papers), and the natural fibers actually absorb adhesive and moisture, which poses the risk of staining or warping. On top of that, grasscloth wallpaper is super difficult to trim because the natural fibers fray when cut, making clean edges very hard to achieve. You also only have one chance to apply it to the wall, as  repositioning can stretch or damage the delicate paper backing and fibers. Now, I have my fair share of experience installing wallpaper. That said: If you’re not experienced with wallpaper, definitely call a professional before attempting grasscloth. Call me crazy, but I actually love putting up wallpaper. I’ve installed almost every kind: ultra-patterned, textured vinyls, peel-and-stick—you name it. But I’ll admit, I was nervous to attempt grasscloth. I knew it can be finicky (and I can be a little clumsy) but I figured that I’m relatively experienced with wallpaper, so I’d give it a shot. Here are the top 3 things I learned—plus one huge mistake to avoid. Key Takeaways Real grasscloth wallpaper, made from natural fibers like jute or seagrass, is extremely fragile and sensitive to moisture, paste, and pressure. Prep and precision are everything: successful installation depends on meticulous preparation. Patience pays off (but it’s not for beginners). Even for an experienced wallpaperer, installing grasscloth was time-consuming and mentally taxing. Credit: David Tsay 1. Do: Paste the Paper and the Wall Most grasscloth wallpapers will call for the paste the paper method, where you apply the paste directly to the back of the wallpaper. Actually pasting the grasscloth is probably the stickiest part of the process, figuratively and literally. You need to find the sweet spot. Too much and you risk it seeping out the seams and staining the edges, but you need enough to make the wallpaper pliable and have it actually stick to the wall.  To get the right amount, I used a foam roller to apply the paste (I used Roman’s Ultra-Premium Clear Pro 880), then used a brush to do the edges. I made sure to apply enough that the wallpaper would actually stick to the wall, but not too much that would pool under the paper. Evenly spread coats are key; avoid leaving spots with excess, pooling paste. This will create problems later on. After I booked the panel (a common paste-the-paper step that allows the wallpaper to absorb the paste and expand before being hung on the wall) I used the roller to apply a small amount of paste (I’m talking an ultra-thin layer) to the wall. This way, I knew my seams would be well-covered and hopefully avoided the need to go back and re-paste the edges. It also gave me a little bit more “give”, letting me very gently slide the wallpaper in place without risking stretching or tearing it. Once its up, use a wallpaper roller (not a flat smoothing tool, which can damage the paper) to smooth it out. Cut the overage with a super sharp knife. If you have any paste that comes out of the sides, use a paper towel to wipe it out and away from the wallpaper. Do not let any paste touch the front of the paper as it’s impossible to remove. Related 2. Do: Cut Before You Paste Regular wallpaper (not grasscloth) is usually quite pliable and easy to cut. Grasscloth is not. It’s very (very, very) difficult to work around beams, doorways, and corners. That said: I recommend cutting the wallpaper panels to size before you paste them to the wall. This crucial step seems like a headache but will save you so much time in the long run. Use super sharp, clean scissors to cut the wallpaper panels, then use a very sharp knife to trim the edges once it’s up. If you’re working in an inside corner, cut two separate panels that join together. (However, if you’re wrapping around a corner, work with a single large panel.) Make sure your knife always stays sharp as you work. Dull knives risk damaging the paper and make for messy, frayed edges. 3. Do: Plan Panels Before You Start Unlike regular wallpaper, grasscloth is not all the same. Because its handmade from natural fibers, every single roll is different and color can vary from one roll to the next. That said, plan your roll transitions carefully. When you’re wallpapering a large focal wall, use as much of the same roll as you can, with the main panels coming from the same roll. If you were to use one panel from one roll and another from the next in the center of a focal wall, you risk a major color difference right in the middle of the room. While these natural imperfections and color variations are the draw, beauty, and charm of grasscloth, it’s still important to make sure the final look feels cohesive.  Try to plan your room so that you’re transitioning from roll to roll in inconspicuous areas like corners or behind curtains or pieces of furniture. That way, a major color difference or seam ins’t as noticeable. While we want to be able to see each individual panel and the natural changes, major variations

    Share this page
  • | | |

    Refinancing Versus Selling Your Investment Property

    In today’s news, it’s common to hear stories about Canadian real estate investors who bought at the market peak a few years ago and now feel buyer’s remorse as property values are sinking in 2025. Even investors who entered the market earlier than 2022 are struggling to shoulder higher carrying costs against a less-active rental market. Mortgage, credit card, and automobile delinquencies are also up, especially in Ontario. On top of this, the average non-mortgage debt for Canadian consumers climbed up 2.74% in the first quarter of the year to reach $21,859. With many homeowners under financial stress, investors may be considering their options, namely to hold, to refinance, and (as a last option) to sell. Costs of Refinancing vs. Selling To help illustrate the costs of refinancing versus selling, let’s take one example of an investor who currently owns a two-bedroom condo in Downtown Toronto, which he is renting out. This property is currently worth $800,000, which is a bit devalued from the market peak 3 years ago. He has owned it for a while, so his mortgage loan is only about $400,000. His carrying costs are high because he renewed his mortgage term when interest rates were around 5%, but he is nearing the end of his term and interest rates are much lower. His daughter is about to go to college, so he wants to help her cover her tuition and living expenses. Therefore, he is considering refinancing or selling his condo investment property to reduce his monthly financial burden and have extra funds to help his daughter. Let’s look at the cost breakdown of both options. Refinancing Selling Appraised Home Value $800,000 Current Mortgage Loan $400,000 Cost to Refinance or Sell (agent/broker fees, mortgage penalty, legal costs) $2,000 $50,000 Capital Gains Tax N/A $92,000 New Mortgage Loan $600,000 N/A Money Extracted Minus Costs $198,000 $257,000 In the short term, selling can provide more value for this investor, as the difference between refinancing and selling is an estimated $59,000 in cash. However, this is just a quick estimate and a shallow glance at the immediate effects of selecting either option. What happens when we look deeper and project into the future? Why Selling Could Cost You More Than You Think Once you sell, you give up the three pillars of real estate wealth: leverage, capital appreciation, and cash flow. The moment you sell, it all stops—no more equity growth, no more rental income, no more long-term gain. It ends right then and there. But when you refinance instead, you get the best of both worlds: ✅ Immediate access to cash to help you now ✅ Continued growth on your $100,000 investment Over the last 25 years, home prices have appreciated at an average rate of 7.5%. Even at a conservative 4% annual growth, if your property is worth $800,000, that’s $32,000 a year in equity gain—without lifting a finger. And that’s on top of your tenant paying down your mortgage and generating monthly cash flow. If you keep that property for another 15 to 25 years, the wealth potential multiplies. We’re not talking about a one-time gain of $257K. We’re talking about 10x that amount — while still holding the asset, benefiting from appreciation, and using someone else’s money (your tenant’s) to build your net worth. Refinancing keeps your wealth working. Selling shuts it down. What Are Your Long-Term Goals? Both refinancing and selling can help this investor achieve his immediate objectives: reducing his carrying costs and sending his daughter to college. However, in the long run, they will deliver different results. Therefore, it is crucial for any investor to keep their long-term goals in mind. Short-Term: Reduce Current Debt and Financial Strain If you are currently under the weight of heavy debts (including multiple mortgages, credit card debt, or other loans) and your carrying costs are growing out of hand, you may consider selling your property to tackle both of these problems at once. The net proceeds of selling your real estate investment can help you pay off other debts while immediately removing that property’s carrying costs from your monthly ledger. However, if your situation only needs a slight adjustment to be sustainable again and borrowing rates have dropped, refinancing your high-interest fixed-rate mortgage may be just what you need to carry on. By refinancing and getting a lower interest rate while extracting some optional extra cash, you may be able to lower your monthly costs and improve your cash flow to cover other expenses. You should still weigh the refinancing option against the qualifications you may need to apply for a new mortgage and the penalty of breaking your current mortgage agreement. Not everyone’s situation may allow them to refinance, as lenders will look at your debt ratios, which may have worsened since you last applied for a mortgage. Additionally, if you are near the beginning of your mortgage term or have a closed agreement, breaking your current mortgage may be extremely costly. Long-Term: Use The Equity to Spend or Invest More Refinancing offers an attractive avenue for you to extract cash equity without incurring the many expenses of selling your property. The cost to refinance for some can be quite minimal, as some mortgage brokers offer cashback incentives to cover legal fees. The equity you withdraw is not subject to capital gains tax either, which would otherwise take a huge bite out of your

    Share this page
  • | |

    Two rental housing towers eyed for Kingsway near Fraser Street in Vancouver

    Nearly four years ago, a rezoning application was approved to redevelop the southeast corner of the intersection of Kingsway and Carolina Street — situated on the southernmost border of the Mount Pleasant neighbourhood of Vancouver — into a six-storey, mixed-use building with 80 secured purpose-built market rental homes. But the project — which was one of the larger rental housing proposals in Metro Vancouver at the time, prior to the current wave of proposals — did not proceed as planned. As it turns out, this is because the project was being redesigned for a much larger mixed-use rental housing concept under the prescriptions and stipulations of the City’s Broadway Plan. A new rezoning application has been submitted to redevelop 602-644 Kingsway and 603-617 East 16th Ave., which entails a larger development site than the original concept — growing the available footprint by 50 per cent to over 30,000 sq. ft. The project is just west of the prominent intersection of Kingsway and Fraser Street. The original north site entails old low-rise commercial buildings, including a former funeral home building, while the addition of a south site includes a surface vehicle parking lot and low-rise residential and commercial buildings. Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Google Maps) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Cancelled 2020/2021 concept: Current condition (top) and 2020/2021 cancelled concept (bottom) of 602-644 Kingsway, Vancouver. (Studio One Architecture) 2025 revised concept: 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Under the new application, local developer Bonnis Properties has partnered with architectural firm Perkins&Will to pursue a 167-ft-tall, 14-storey north tower and a 276-ft-tall, 25-storey south tower. The proponents are pursuing a new concept with two high-rise towers, after determining that a project with three towers would not meet the minimum tower separation requirements from an adjacent lot on Kingsway. There will be a total of 327 secured purpose-built rental homes, including 120 units in the north tower and 207 units in the south tower. Based on the Broadway Plan’s requirement of setting aside at least 20 per cent of the residential rental floor area for below-market units, there will be 66 below-market rental homes and 261 market rental homes. The unit size mix is established as 152 studios, 47 one-bedroom units, 105 two-bedroom units, and 23 three-bedroom units. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The north and south towers will be physically connected on the second level by a pedestrian bridge over the laneway that separates the two sites, enabling continuous shared amenity spaces between both buildings. Expansive indoor and outdoor amenity spaces will be found on the second level — including landscaped outdoor areas on the base podium rooftops — along with outdoor amenity spaces on the rooftops of both towers. The rooftop of the north tower’s podium also features a 2,900 sq. ft. childcare facility for up to 20 kids, plus outdoor play space. Down below, about 19,400 sq. ft. of retail/restaurant space spread across the ground levels of both buildings will activate the street frontages and a new public plaza. This triangular-shaped plaza space — a public space element passed down from the original concept — will be achieved by repurposing a 70-ft-long segment of East 15th Avenue and median that parallels Kingsway. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The floor plates of both towers rising above the podium are curved to strategically place the structural columns along the perimeter of the floor plates, which serves to optimize the views from the residential units and enable a more efficient unit layout. The exterior design is defined by a 40-60 window-to-wall ratio, with protruding balconies protected by steel picket guard railings. Four underground levels at the north tower site will accommodate 141 vehicle parking stalls, while two underground levels at the south tower site will provide over 600 secured bike parking spaces. Altogether, the project will generate a total floor building floor area of over 257,000 sq. ft., establishing a floor area ratio density of a floor area that is 8.5 times larger than the size of the lot. The site is well served by frequent bus routes along Kingsway, Fraser Street, and Main Street, and about a 15-minute walk from SkyTrain’s future Mount Pleasant Station (intersection of Main Street and East Broadway). Under the Broadway Plan, high-rise tower developments are generally

    Share this page