mystery-beeping-in-your-home?-here’s-what-to-check-first-to-stop-the-noise
| | |

Mystery Beeping in Your Home? Here’s What to Check First to Stop the Noise

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

There are few things more annoying than an incessant beeping sound in your home that no matter how high and low you search, you can’t identify. It could be a smoke detector, appliance, security system or some other device, and it can feel like playing whack-a-mole, going from room to room to try and track it down.

To help you figure out what’s beeping, we’ve listed the common culprits and explained how you can stop the noise for good.

Common Sources of Beeping

While every home is different, the following items are often the cause of intermittent beeping in houses and apartments.

Smoke Detectors

Smoke detectors let out a shrill beep when they detect smoke, but a subtle chirping sound that comes every 30-60 seconds is likely indicative of a low battery or other fault.

Carbon Monoxide Detectors

Similarly to smoke detectors, a carbon monoxide detector will produce a quiet chirp when the battery is low. Check all the places where carbon monoxide detectors should be; including bedrooms, the basements and attic.

Appliances

Modern appliances are designed to beep when alerting you of a fault, a finished cycle, and more. This includes but isn’t limited to the following appliances:

  • Dishwashers
  • Washing Machines
  • Dryers
  • Refrigerators
  • Dehumidifiers
  • Air Purifiers
  • Freezers
  • Ovens
  • Countertop Appliances

Security Systems

Your home security system may emit a beep or chirp to alert you of a dying battery or a fault, such as a door or window that’s unsecured.

Thermostat

Thermostats may produce a beeping sound to indicate a low battery, a system fault, or a problem with the thermostat.

Personal Electronic Devices

Your phone, smart watch, tablet, and computer should be some of the first things you check when hearing a mysterious beep in your home. These devices are known for making strange sounds, and it’s very likely that one could produce a new sound you’ve never heard related to a new alert or fault.

Smart Sensors and Other Smart Devices

Smart home devices and smart sensors like water and moisture detectors may beep to indicate a dying battery or to alert you of a potential problem.

Steps to Identify the Source of Beeping

Try these steps to identify the source of your beeping.

  • Listen from room to room. Go from room to room and listen closely until you hear the beep. Try to determine if the beep is in the room or if you’ve gotten further away from it.
  • Turn off all electronic devices one at a time. This may take some time, but go to each electronic device and turn it off, wait for the beep, then move on to the next device until you no longer hear the beep. We recommend starting with the easiest items to turn on and off. If you can safely turn off your home’s main breaker, this will determine if the beep is coming from a battery-powered device or one powered by the grid.
  • Take notes. If you still haven’t located the beep, time how long the space is between the beeps and note if there are any changes in the beep’s sound or approximate location, which could indicate different sources.

To increase the likelihood of accurately locating the beep, turn off anything making ambient noise in your house, such as the HVAC, fans, and the TV.

How to Resolve the Beeping Sound

A good first step is to first reference the manual for the appliance or device, which often lists potential causes for the beeping. Here are a few reasons to consider and steps to take to resolve the issue.

  1. Replace or charge batteries. If the device is indicating a low battery, replace the batteries or recharge the device until the beeping stops.
  2. Reset devices. If the beep is indicating a fault with the device itself, you can try resetting the device by unplugging it, removing and putting in new batteries or following manufacturer-specific instructions for a reset.
  3. Remedy the external problem. If the device is indicating an external problem, such as moisture or water, fixing the issue should resolve the beeping. If the noise doesn’t stop once the external problem is resolved, reset the device.
  4. Fix an internal problem. An appliance or device could be beeping to alert you of a problem with the item itself such as broken components, improper installation, improper use, and more. Check the manual to see what the possible internal issues could be and how to fix them. You may also need to reset the device.

Don’t turn off a device’s beep without first understanding why it’s beeping. Some reasons for strange beeping from a device could be serious matters that need to be remedied.

Share this page

Similar Posts

  • | | | |

    The Best Thermostat Setting for a Heat Wave. How to Stay Cool Without Overworking Your AC

    When extreme heat hits, it’s tempting to crank the air conditioning as low as it will go. But while that might offer short-term relief, it can lead to sky-high energy bills and put unnecessary strain on your cooling system. So, what temperature should you set your thermostat to during a heat wave? We spoke with industry experts and rounded up smart strategies to help you stay safe, comfortable, and energy-efficient when temperatures soar. What to Set Your Thermostat to During a Heat Wave According to energy experts and the U.S. Department of Energy, the sweet spot is 78°F (26°C) when you’re home and need cooling. If you can, bump it up to 82°F when you’re sleeping and 85°F when you’re away. These settings help reduce the load on your AC, which can prevent breakdowns during critical times, and keep energy bills from skyrocketing. When to Adjust Your Thermostat Lower “Seventy-eight degrees creates the optimal balance between comfort and efficiency. Seventy-eight degrees may be warm for many people, but it is the standard recommendation to stay comfortable and be efficient during the summer months,” says Lane Dixon, Vice President of Operations at Aire Serv. If you have vulnerable household members, like infants, older adults, or pets, you may need to keep the thermostat slightly cooler. In these cases, 76°F may offer a more comfortable balance between safety and savings. It’s also helpful to use smart thermostats that learn your preferences and adjust automatically, especially during peak demand times. Related What to Do if Your AC Can’t Keep Up Keeping your air conditioner running smoothly during extreme heat isn’t just about comfort—it can help you avoid breakdowns and surprise repair bills. John McGaughey, vice president of sales at AUX AIR USA, shares several practical ways homeowners can help their cooling systems perform at their best this summer. Replace Your Air Filter Regularly “A dirty filter is one of the most common reasons systems underperform,” McGaughey explains. He advises checking the filter every month during heavy use and replacing it as needed (usually every one to three months.) Keep the Sunlight Out Direct sun exposure, especially on south- and west-facing windows, can dramatically increase indoor temperatures. To prevent excess sun from streaming through windows, consider adding blackout or dark-colored curtains and blinds. Time Your Appliance Use Wisely Large household appliances, like ovens, stovetops, and dryers, can heat up your living space fast. Use these in the early mornings or evenings when outdoor temperatures are lower. Use Fans to Improve Comfort Ceiling or box fans don’t cool the air, but they can help you feel cooler by circulating air across your skin and aiding in evaporation. Check Your Outdoor AC Unit The outdoor unit expels the heat your AC system pulls from inside. Keeping the area clear and occasionally rinsing the unit with a hose (while it’s off) can go a long way in improving efficiency. If none of these steps help, it may be time to call in an HVAC technician, especially if you hear unusual noises, smell musty odors, or see ice buildup on your system. DIY AC Fixes Before you call in the pros, try these expert-backed maintenance tips that can improve your air conditioner’s performance—and might even help you avoid a costly repair visit, according to JustAnswer HVAC Expert Randy Huckstadt. Rinse your condenser coil. The HVAC expert first addresses rinsing your condenser coil with fresh water. “Dirty condensers do not allow you to reject the heat from inside the house that the refrigerant absorbed in the evaporator,” he explains. Rinse your evaporator coil. If you can safely access it, he recommends rinsing the evaporator coil as well. He says that you cannot absorb the heat in the house if your coil is dirty. Replace your air filter. Plugged air filters prevent quality airflow, which reduces the capacity of the AC system. Swapping in a clean filter is one of the easiest ways to keep your system working properly. And if your condenser fan suddenly stops working, don’t panic—Huckstadt offers a clever temporary fix. He says you can use a small shower sprinkler to spray the condenser until a repair tech arrives. Water will take the place of a failed condenser fan.

    Share this page
  • | | |

    5 Summer Habits That Might Be Spiking Your Utility Bills (and What to Do Instead)

    Credit: Getty Images / StockSeller_ukr Summer weather is ideal for enjoying the pool, the yard, and the sun, but after being outside for a few hours, it can also be a great relief to step into an air-conditioned home. These hot temperatures often cause many homeowners to adopt certain habits that are more wasteful than helpful. In an attempt to escape the heat, keep the house cool, and maintain the lushness of the yard, it can be all too tempting to try things that actually increase utility bills, costing you more in the long run for minimal relief. Use this guide to discover what summer habits secretly spike utility bills and what to do instead. Scott Levene is the vice president of Levco, a fuel and HVAC solutions company. He is also a licensed HVAC professional with nearly 20 years of experience. Read on to discover the ways you might be increasing your monthly bills without even realizing. 1. Cooling Unused Areas of the House Air conditioners help to cool down the home, but when you aren’t actively using specific rooms, there is no need to keep the doors open to these areas of the home. Central air conditioning systems might still provide some cooling to these areas through the ductwork, but ultimately, the cooling capabilities will be more focused in the central areas of the home where the thermostat is typically located. Closing certain doors allows the temperature to drop more effectively in the areas you are actually using, while saving energy. This particular trick works incredibly well for window and standing air conditioners, since their output is already focused in a single area of the home. 2. Running Fans 24/7 Fans can help move cool air throughout the home and provide direct relief to individuals who are near the fan. However, fans do not actually cool down the house, and their continuous operation can even add heat to the house. “A common habit is leaving fans on in empty rooms. Fans cool people, not rooms, so leaving them on when no one’s around just adds to the electric bill without any benefits,” says Scott Levene, vice president of Levco and licensed HVAC professional. 3. Frequent Lawn Watering Watering the lawn frequently might keep the grass looking lush and the gardens blooming nicely, but it is also a huge use of water that will drastically increase the cost of your water bill throughout the summer. In some areas, watering the lawn and yard might even be against local regulations due to droughts and water conservation efforts. Instead, it’s best to consider possible alternatives that can avoid waste and help save on your water bill. 4. Running the Air Conditioner with the Windows or Doors Open Many homeowners know to turn off the air conditioner if they are opening a window or door. However, this same knowledge might not be as obvious to other people living in the home, like children or teenagers. Additionally, some adults might open the windows on cooler evenings to bring in fresh air, but then forget to turn the AC off, which increases energy waste and leads to higher energy bills. 5. Setting the Thermostat Temperature Too Low Unfortunately, just because you turn the thermostat temperature as low as possible, this does not increase the speed at which the home will be cooled, though this doesn’t stop many homeowners from trying year after year. “The most common habit we see is turning the thermostat down too low, thinking it will cool the house faster. Setting the thermostat to 65°F instead of 75°F doesn’t make it work any faster; it just makes the system run longer and work harder, which drives up utility bills,” explains Levene. How Do These Habits Burn Your Budget? Deciding to put a stop to these habits and making the switch to a more budget-friendly alternative will help keep more money in your wallet and reduce waste. “The examples listed might only cost a few extra bucks a day, but that adds up over time,” Levene says. “Additionally, the extra strain on the HVAC system causes faster wear and tear, which can shorten the lifespan of the equipment. Frequent repairs or premature replacement costs are a major expense.” Related 7 Budget-Friendly Alternatives to Beat the Heat The more unnecessary warm-weather habits you tend to do each year, the higher the cost of your energy bills and the larger your ecological footprint, which is reflected in water and energy waste. Instead, work toward adopting budget-friendly habits that can both keep you cool and reduce your spending this summer season. 1. Use a Programmable Thermostat When you have a regular thermostat, it’s your responsibility to change the temperature throughout the day and when you leave the home. “Set your thermostat to a reasonable temperature. We recommend 76°F to 78°F when you’re home and 78°F to 80°F when you’re away,” Levene says. With a programmable thermostat, you can simply set a specific schedule based on when you leave for work, when you typically go to sleep, and when you wake, so you can reduce energy waste without even thinking about it. 2. Set Up a Rain Barrel Constantly watering the lawn is a huge waste of water, and it can quickly add up on your water bill. Instead, use one or more rain barrels in the yard to catch and collect rain. The collected water

    Share this page
  • | | | | | | | |

    14-Storey Condo Building Pitched for Oak & King Edward

    Westbank has submitted a rezoning application for the Esso Station at the Southwest corner of Oak Street and West King Edward Street in Vancouver. The 11,328 SF site at 1010 West King Edward is currently zoned C-2, which allows up to 6-storeys for rental, or 4-storeys for condo. The Cambie Corridor Plan allows up to 6-storeys for condo and 3.0 FSR. The proposal is to allow for a 14-storey condo building that includes: 85 condo units; 34 one-bedrooms, 36 two-bedrooms & 15 three-bedrooms; 800 SF of retail space on the ground floor; a total density of 8.0 FSR; A building height of 143 ft. 106 underground parking stalls. This application is being considered under the  Cambie Corridor Plan. The architect for the project is Olson Kundig, who also designed Wesgroup’s condo project “W16” at West 16th and Cambie Street. The full rezoning application can be viewed here: https://www.shapeyourcity.ca/1010-w-king-edward

    Share this page
  • | | |

    Things to Never Do with Your AC When the Heat Index Hits Triple Digits

    This summer is the hottest on record (for the third year in a row!), so we assume that your home’s air conditioning system has been hard at work for the past few months. While it might seem tempting to crank the temperature as low as it can go during a heatwave, mistakes like these can cause some severe damage to your system over time.  We spoke to Angie Hicks, co-founder of Angi (formerly Angie’s List), for expert advice on the mistakes homeowners might be making with their AC during a heatwave. Avoiding these errors (and following a few other expert tips Hicks recommends) will help keep your home cool while conserving energy. What to Never Do with Your AC During a Heatwave When you leave the house during the summer, do you turn your AC off before you go to conserve energy? If so, you might actually be wasting more energy than you’re saving—not to mention the fact that you’re likely putting extra strain on your air conditioning unit, too.  If you turn your AC off when you leave the house, you might temporarily lower your energy usage while you’re away. However, during that time, you also lose all the cold air your AC has been producing throughout the day, causing your house to return to a very high temperature. When you return and turn your AC unit back on, it has to work twice as hard to cool your home down. This puts unnecessary strain on your home’s air conditioning. The solution? Hicks says that you should increase the temperature your air conditioning is set to when you leave the house. Hicks recommends raising the temperature by 7 to 10 degrees each time you leave, up to a maximum of 85°F. “By keeping the AC at a higher temperature, you save energy and create efficiency, but your home can still be cooled down again without using too much energy,” says Hicks. Once you return home, you can lower the temperature of your AC again. This helps you save energy while you’re out, without putting any extra strain on your AC when you return. What If You’re Leaving Home for a Long Time? “If you’re leaving your home for longer than a few hours, it’s considered a long period,” says Hicks. Her answer stays the same whether you’re gone for the day or a couple of weeks of vacation—keep your AC on, but at a higher temperature. While it might seem like it’s a safe bet to conserve energy by turning off your AC when you’re away on vacation, this can actually encourage other home issues to arise in the heat (like humidity and potentially even mold growth). Keeping your home’s temperature set to a maximum of 85°F can help prevent these problems. How to Prevent Strain on Your AC When you’re at home, you might consider setting your air conditioning to a slightly lower temperature than you think, especially during a heatwave. “A good temperature setting is about 78 degrees when you’re home and awake,” says Hicks. “When you sleep, you might want to lower this to your comfortable sleeping temperature.” “It might be tempting to lower your AC in extreme heat, but this can use a lot of extra energy and shorten the lifespan of your AC,” adds Hicks. Keeping your AC set to a higher but still comfortable temperature can help you save money, conserve energy, and keep your AC running smoothly. Related Other Habits to Maximize Heatwave Energy Efficiency Your AC isn’t the only thing that can help keep your home cool during the summer. The more effort you put into utilizing other cooling solutions along with your AC, the less strain you’ll be putting on it—and the more energy you’ll be able to conserve when the temperature spikes outside. Hicks recommends keeping your blinds closed during the day to block out as much sunlight as possible throughout your home. This will help keep it cooler, especially during extreme heat. She also recommends turning on ceiling fans if you have any; this is a great way to allow cool air to circulate and make your home feel cooler.  According to Hicks, you should also open a window at night if the outside temperature is cooler than the inside temperature. This can help lower the temperature of your space enough that your air conditioning might not even need to turn on during the night. You can also try other solutions to help prepare your home for a heat wave, such as using cooling sheets, avoiding oven use, and utilizing personal fans to help you feel cooler. Signs You’ve Been Putting Too Much Strain on Your AC Your AC has likely been working hard all summer, which means you need to keep a close eye on it and perform regular maintenance to ensure it continues to work correctly. “This means replacing your filters about every three months and getting it tuned up in the fall and spring,” says Hicks. Performing these minor maintenance tasks can help you prevent major issues from arising in the future. Sometimes, bad luck can strike your AC system during the worst times, especially if you’ve had a habit of cranking the temperature down whenever it’s hot outside. “If you feel like your system isn’t cooling properly, there are uneven temperatures, you hear funny noises, or smell something different, it could be a sign it isn’t working properly and

    Share this page
  • | |

    Two rental housing towers eyed for Kingsway near Fraser Street in Vancouver

    Nearly four years ago, a rezoning application was approved to redevelop the southeast corner of the intersection of Kingsway and Carolina Street — situated on the southernmost border of the Mount Pleasant neighbourhood of Vancouver — into a six-storey, mixed-use building with 80 secured purpose-built market rental homes. But the project — which was one of the larger rental housing proposals in Metro Vancouver at the time, prior to the current wave of proposals — did not proceed as planned. As it turns out, this is because the project was being redesigned for a much larger mixed-use rental housing concept under the prescriptions and stipulations of the City’s Broadway Plan. A new rezoning application has been submitted to redevelop 602-644 Kingsway and 603-617 East 16th Ave., which entails a larger development site than the original concept — growing the available footprint by 50 per cent to over 30,000 sq. ft. The project is just west of the prominent intersection of Kingsway and Fraser Street. The original north site entails old low-rise commercial buildings, including a former funeral home building, while the addition of a south site includes a surface vehicle parking lot and low-rise residential and commercial buildings. Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Google Maps) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Cancelled 2020/2021 concept: Current condition (top) and 2020/2021 cancelled concept (bottom) of 602-644 Kingsway, Vancouver. (Studio One Architecture) 2025 revised concept: 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Under the new application, local developer Bonnis Properties has partnered with architectural firm Perkins&Will to pursue a 167-ft-tall, 14-storey north tower and a 276-ft-tall, 25-storey south tower. The proponents are pursuing a new concept with two high-rise towers, after determining that a project with three towers would not meet the minimum tower separation requirements from an adjacent lot on Kingsway. There will be a total of 327 secured purpose-built rental homes, including 120 units in the north tower and 207 units in the south tower. Based on the Broadway Plan’s requirement of setting aside at least 20 per cent of the residential rental floor area for below-market units, there will be 66 below-market rental homes and 261 market rental homes. The unit size mix is established as 152 studios, 47 one-bedroom units, 105 two-bedroom units, and 23 three-bedroom units. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The north and south towers will be physically connected on the second level by a pedestrian bridge over the laneway that separates the two sites, enabling continuous shared amenity spaces between both buildings. Expansive indoor and outdoor amenity spaces will be found on the second level — including landscaped outdoor areas on the base podium rooftops — along with outdoor amenity spaces on the rooftops of both towers. The rooftop of the north tower’s podium also features a 2,900 sq. ft. childcare facility for up to 20 kids, plus outdoor play space. Down below, about 19,400 sq. ft. of retail/restaurant space spread across the ground levels of both buildings will activate the street frontages and a new public plaza. This triangular-shaped plaza space — a public space element passed down from the original concept — will be achieved by repurposing a 70-ft-long segment of East 15th Avenue and median that parallels Kingsway. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The floor plates of both towers rising above the podium are curved to strategically place the structural columns along the perimeter of the floor plates, which serves to optimize the views from the residential units and enable a more efficient unit layout. The exterior design is defined by a 40-60 window-to-wall ratio, with protruding balconies protected by steel picket guard railings. Four underground levels at the north tower site will accommodate 141 vehicle parking stalls, while two underground levels at the south tower site will provide over 600 secured bike parking spaces. Altogether, the project will generate a total floor building floor area of over 257,000 sq. ft., establishing a floor area ratio density of a floor area that is 8.5 times larger than the size of the lot. The site is well served by frequent bus routes along Kingsway, Fraser Street, and Main Street, and about a 15-minute walk from SkyTrain’s future Mount Pleasant Station (intersection of Main Street and East Broadway). Under the Broadway Plan, high-rise tower developments are generally

    Share this page
  • | | | | |

    What Is That Burning Smell from the Furnace? How to Prevent Unpleasant Odors

    As temperatures start to drop, homeowners make the switch to heating to ensure the home remains comfortable. However, the warm air can often be accompanied by a burning smell that quickly permeates your space. However, there are ways to prevent this odor in the first place and other methods for handling unfamiliar odors, like a musty or electrical burning smell. Use this guide to discover how to prevent the furnace smell when you turn it on for the season, other mysterious furnace smells you might encounter, and when to call a professional. Why Does the Furnace Smell When You First Turn it On? In most cases, when a furnace smells after being turned on for the first time in the season, there’s no need to worry. The smell of burning dust should fade quickly. But, if the smell persists or you notice a different smell from the furnace, it could be due to a serious issue with the HVAC system. Consider these common reasons why the furnace may smell when you first turn it on. Burning dust smells are relatively common when first turning on the furnace for the season. This is typically due to a buildup of dust on the burners, heat exchanger, air ducts, and other heating unit components. Generally, this odor will fade quickly as the thin layer of dust is burned away. Musty odors coming from the furnace usually indicate that there is mold or mildew trapped inside the HVAC system. It may be in the heating unit, the ductwork, the furnace filter, or even the humidifier pad. Electrical burning smells are not normal and should be addressed as soon as possible. Sometimes the smell is due to a foreign object stuck in the ductwork or vents of the HVAC system, but on other occasions, this smell may be due to burned or frayed wiring, or can also be a result of the furnace overheating. Rotten egg scents produced by the furnace are a sign of a gas leak. Since natural gas is odorless, the gas companies add a sulfur-based chemical to give off the distinct odor of rotten eggs as a way of warning homeowners that there is gas in the vicinity. Gas is flammable, putting the home at risk of a fire or an explosion, and it’s also harmful if inhaled, so you should vacate the home immediately. Smoke smells can occur if the exhaust vent is blocked, forcing the combustion exhaust from the furnace to escape into the home. This smell may also be a result of flammable material inside the ductwork, near heating vents, or too close to the furnace. Animal odors are often due to pets. Pet hair and dander are taken into the ducts through the cold air return, where they will remain in the ducts. Every time the furnace turns on, it recirculates pet hair and smells, until you have your ducts professionally cleaned. It’s also not unheard of for a pest to enter the ductwork of the home, where droppings and hair will produce a foul odor when the furnace is turned on. Oil smells can indicate that the filter on the furnace is clogged. This is typically due to a problem with the filter, which can be easily resolved by an experienced DIYer or a professional HVAC tech. Sewage stenches are powerful and off-putting, but can also help identify when there is a problem with the home sewage system. If the furnace starts to smell like sewage when it is first turned on then there may be a broken wastewater line or an open sewer line nearby that will need to be located and repaired. Chemical smells from the furnace should not be ignored. This could indicate that the heat exchanger is broken or not operating properly, which may lead to the release of odorless, invisible carbon monoxide gas; a known risk of gas-based heating systems. How to Prevent the Furnace Smell When You Turn It On Burning Dust Smell While the burning dust smell that comes from the furnace when it is first turned on is relatively harmless, that doesn’t mean you need to just deal with it each year. Instead, you can have the furnace and evaporator coil cleaned by a professional before the cold season begins. DIYers with enough experience and confidence can clean the evaporator coil in a furnace on their own by turning off the furnace, removing the access panel, then gently cleaning the coil with a soft cloth or brush, while being careful to avoid damaging the fins. Wipe down the condensate pan and the surrounding areas, then replace the panel and turn the furnace back on. You should also take this opportunity to replace the air filter, where dust might be trapped from the previous season. If the burning dust smell persists, then it’s recommended to turn off the furnace and contact an HVAC professional to inspect and repair the HVAC system. Musty Odors Musty odors are typically produced by mold and mildew. In some cases, the mold or mildew is attached to dust or other debris, so it burns off relatively quickly, but if the musty odor doesn’t go away, then you should start by replacing or cleaning the air filters. Similarly, you can replace or wash the humidifier pad using a solution of water and vinegar to kill any mold or mildew. However, if the musty odor still

    Share this page