new-13,000-sq-ft.-off-leash-dog-area-now-open-in-vancouver-park-–-daily-hive-vancouver
| |

New 13,000 sq. ft. off-leash dog area now open in Vancouver park.

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

Vancouver dog lovers and their pups now have a new place to run around after the opening of a new off-leash area in South Cambie.

The City unveiled the nearly 13,000 sq. ft. off-leash area in Heather Park, located at the southeast corner of West 18th Avenue and Willow Street.

According to Park Board Chair Laura Christensen, the new off-leash area is another milestone in the City’s commitment to increasing dog-friendly spaces in Vancouver.

Vancouver dog park

“Our People, Parks and Dogs Strategy highlights the importance of building a varied network of off-leash areas throughout the city that meet the needs of all park users, including those with and without dogs,” said Christensen in a release. “We’re thrilled to welcome Vancouver’s four-legged community and their owners to Heather Park.”

Heather Park’s off-leash area features a large open space and a series of agility features, including hurdles, stepping stones, and a ramp. Additional seating for owners and a drinking fountain and dog bowl have been added for two- and four-legged visitors.

Vancouver dog park

The design for the South Cambie off-leash area was created using feedback from over 1,300 people who took part in two rounds of public engagement.

Heather Park is one of three new off-leash dog areas proposed for Vancouver parks. Work is expected to be completed this summer at a similar area at Granville Park in Fairview, and a renewal and expansion of Emery Barnes Park’s off-leash area is slated for completion around the same time.

Share this page

Similar Posts

  • | | | |

    Toothpaste Is the Secret to Perfectly-Hung Picture Frames (Yes, Really!)

    If you’re always up for learning a new home improvement hack, you may have come across this viral Instagram reel that shows how to use toothpaste to hang pictures. As stunning as a gallery wall can be, the process of hanging pictures is not always quick and easy—and sometimes results in countless nail holes that need to be patched up. The toothpaste picture-hanging hack promises a foolproof method that takes out the guesswork. Best of all, it only requires a cheap item everyone already has at home: a regular ole tube of toothpaste. Keep reading to find out whether the viral hack actually works, what type of toothpaste works best, and how to make sure pictures are level. How the Toothpaste Picture Hanging Hack Works The viral toothpaste picture hanging hack is designed to take the guesswork out of hanging frames on the wall. It starts with a basic tube of white toothpaste that will serve as a the marker for where you need to hammer or drill a hole. To start, take your picture frame and lay it face-down on a flat surface. Locate the hanging hardware first—typically there will be one or two pieces of hanging hardware on the back of a frame, depending on how large and how heavy it is. The most common types of picture frame hardware are sawtooth hooks, D-rings, triangle hooks, and keyholes. Take the toothpaste a squeeze a small amount of it on the hanging hardware. If it’s a sawtooth hook, squeeze a dot of toothpaste in the middle of the sawtooth hook where the nail will go. Pick up the frame with the hanging hardware facing the wall, position it where you want the picture to hang, then gently press against the wall until the toothpaste transfers onto the wall. The toothpaste mark (or multiple marks) now serves as a guide to show you exactly where the nail holes need to be. Install nails or screws, then wipe off the excess toothpaste using a clean cloth or paper towel. Related How to Make Sure the Picture Is Level The hack seems simple enough, right? But if there is more than one piece of hanging hardware on the back of the frame or if you are hanging a pair of frames, how do you make sure the holes are level? Because there’s nothing more frustrating than realizing a picture is hanging crooked or a pair of frames doesn’t quite line up. This is where a level comes in. The viral Instagram reel doesn’t show a level being used, but it’s easy to incorporate into the hanging method. You may just need an extra set of hands to help you out, especially if the picture frame is beveled or not deep enough to prop a level on. Here’s where the tool comes in: Before you press the picture frame with the toothpaste on the wall, place a level on top of the frame. If the frame is deep enough to hold the level, you can do it by yourself. If not, have someone hold the level in place for you. Make any necessary adjustments and once the frame is level, press it against the wall to make toothpaste marks. Alternately, you can use a laser level that shoots a perfectly straight line across the wall to direct where you should position the frame. What Type of Toothpaste to Use For anyone nervous about whether or not toothpaste can hurt painted walls, you don’t have to worry about it causing any permanent damage. Sometimes toothpaste is actually used to clean scuff marks off of walls, so it is safe to use on most walls and it will not strip the paint. As for the type of toothpaste that’s best to use for the hack, a basic white toothpaste is a good choice. There’s no need for any fancy whitening or breath-freshening toothpaste, since all you need it to do is make marks on the wall. The thicker and creamier the consistency of the toothpaste the better it transfers onto the wall, so try to avoid gel-based toothpastes that may be too thin and run down the walls.

    Share this page
  • | | | | | |

    Nearly 4,300 properties in Broadway Plan and Cambie Plan areas to be proactively rezoned by the City of Vancouver

    The City of Vancouver is moving forward with a sweeping proposal to proactively rezone thousands of properties in the Broadway Plan and Cambie Corridor Plan areas, as part of an ambitious effort to streamline the development process and boost housing supply near existing and future SkyTrain stations. In next Tuesday’s public meeting, City Council is expected to endorse City staff’s recommendation to refer bylaw amendments to a future public hearing for deliberation and final decision, which would likely be held in September or October — after the forthcoming summer break. This follows City staff’s public consultation beginning in March 2025, when they first announced the proposal. In an interview with Daily Hive Urbanized early this year, Josh White, the City of Vancouver’s general manager of planning, urban design, and sustainability and director of planning, also outlined many of these forthcoming changes. More details have now been released. If approved by City Council later this year, this would introduce standardized zoning for low-rise, mid-rise, and high-rise residential buildings — generally aligning with the existing prescriptions and stipulations of the property’s location under the Broadway Plan or Cambie Corridor Plan, while also considering more recent economic and financial viability factors. Generally, R3 zones would allow low-rise apartments up to six storeys — or eight storeys with affordable housing, and a floor area ratio (FAR) density of a floor area up to three times the size of the lot. R4 zones would support mid-rise buildings, typically around 12 storeys and a FAR density of up to 4.0. R5 zones would permit high-rise towers up to 22 storeys and a FAR density of up to 6.5, depending on the proximity to SkyTrain stations and affordability requirements. It is noted that FAR densities will be retained, but a more generous maximum building height will be considered to accommodate a greater range of design approaches due to varying site conditions and on-site public spaces and landscaping. Through such City-initiated rezoning over large swaths of neighbourhoods, this eliminates the need for property owners, developers, and builders to submit an individual rezoning application for their project. Instead, such projects on a City-initiated rezoned site can go straight to the development permit application, which will save applicants costs related to City fees and hiring architects and consultants to achieve the rezoning regulatory step, as well as reducing opportunity costs and added construction costs from inflation as a result of a longer timeline. City staff estimate that these blanket zoning reforms over the qualifying properties will shave 12 to 15 months off the overall development timeline. As well, this will reduce City staff’s time set aside for reports and public hearings with City Council, enabling them to reallocate resources to other tasks and priorities. So far in 2025, rezoning applications in the Broadway Plan and Cambie Corridor Plan account for about 40 per cent of all public hearings. In sites where a tower form is permitted and complex site conditions also exist — such as tower per block limit policies, building shadowing considerations, and contaminated soils, a “rezoning-to-district” process would still be required. This rezoning-to-district process would be streamlined and shorter than the standard rezoning process. The overwhelming majority of these properties are located within the Broadway Plan area, specifically sites closest to the Millennium Line’s future stations on the Broadway extension, as well as southern areas within the area plan. For the Cambie Corridor Plan area, the properties are clustered near the Canada Line’s Oakridge-41st Avenue Station. In total, the City-initiated rezoning would apply to 4,294 parcels across the Broadway Plan and Cambie Corridor Plan areas. City of Vancouver City of Vancouver City of Vancouver Over the last few years, the municipal government performed some notable City-initiated rezonings of large single-family neighbourhood areas in the Cambie Corridor Plan, enabling more expedited townhouse developments as already prescribed by the area plan. However, the forthcoming changes are the largest standardized rezoning in Vancouver’s history, and align with the Government of British Columbia’s legislated requirements for the City and other municipal governments. This specifically aligns with provincial legislation relating to transit-oriented development at designated Transit-Oriented Areas and other regulatory changes. As well, through these changes, the City will standardize affordable housing requirements using newly enabled provincial inclusionary zoning powers. Additionally, the real estate industry and provincial officials have called individual site-specific rezoning applications as redundant if the proposed uses and built form are already enabled by an area plan. In addition to aligning with the Broadway Plan and Cambie Corridor Plan, the changes also follow the City’s 2022-approved Vancouver Plan. While there was strong support for the initiative during the public consultation earlier this year — especially for its potential to speed up much-needed housing — concerns were raised about neighbourhood character, infrastructure capacity, and construction impacts. City staff responded by noting that all developments will still undergo design review, and there will still be an opportunity for public input at the development permit application stage. Enhanced tenant protections will remain in place for areas with existing rental housing. A time-limited approach will allow current rezoning applicants to transition into the new zoning framework without redoing tenant relocation plans, as long as they submit development permits within one year of bylaw enactment. Currently, there are about 40 in-stream rezoning applications involving Tenant Relocation Plans within the proposed City-initiated rezoning areas. It is noted that some of these project applicants may withdraw their

    Share this page
  • | | | | | | |

    NDP on TMX pipeline: We didn’t want it. They built it. So let’s use its full potential

    Article content Eby and Sharma exaggerate the degree to which the TMX is “underused … with capacity to spare” after one year of operation. Article content The Canadian Energy Regulator reports that the line has operated at about 80 per cent of its 890,000 barrel-per-day capacity since coming online in May 2024. Moreover, the performance improved in the first quarter of this year. Article content “The pipeline ran at about 85 per cent capacity during the three-month period ending in March,” Chris Varcoe reported in the Calgary Herald this week. The Globe and Mail’s Emma Garney further reported that the line “hit a high of 90 per cent” in March. Article content The demand is such that Trans Mountain has already begun test work to boost capacity by up to 10 per cent by the end of 2026. A longer-term project would add pumping stations to boost it to 1.14 million barrels a day, later in the decade. Article content So much for the B.C. NDP notion that the $34 billion pipeline is languishing through insufficient use. Article content Article content But rather than consult the country’s energy regulator or the national newspapers, perhaps Eby and Sharma were taking their lead from Steven Guilbeault. Article content Guilbeault served as environment minister in the Justin Trudeau Liberal government, where he flourished as a fan of carbon taxation and an opponent of fossil fuel expansion. Article content Carney reassigned him to the Canadian Heritage Department at about the same time as the PM reduced the carbon tax to zero and began talking up the need to expand resource production. Article content It didn’t stop the new heritage minister from wandering outside his lane last month to announce that Canada has no need of more pipelines because TMX was operating at “40 per cent capacity” and the world was approaching “peak oil production.” Article content In the first instance, Guilbeault clearly didn’t know what he was talking about and in the second, there’s much room to debate about when peak oil will be reached. Article content Article content Still, there is a capacity issue regarding the TMX terminal in Burnaby, though not one that involves the pipeline. Article content The terminal is already busy with tankers, having loaded some 741 in the first quarter of the year at a rate that fell just short of one a day in March. But tankers are unable to load fully because of the risk of grounding in Burrard Inlet. Article content The New Democrats have recognized the limitation and come out in support of a federal proposal to dredge Burrard Inlet to a depth that full tankers can traverse. Article content Leading the call is Energy Minister Adrian Dix. As NDP leader, Dix’s snap decision to oppose TMX in the midst of the 2013 election campaign contributed to his loss to Christy Clark. Article content Now that the line is running, Dix supports maximizing its use. “We built it. We paid for it. We should use it,” he says, taking a realistic view of a project that cost him much. Article content Article content Article content

    Share this page
  • | | | |

    6 Reasons Your Lights Are Flickering, Plus Easy Fixes

    Credit: Getty Images / Kateryna Kukota Lights flickering in your home might seem like a cause for concern, especially if you’re unfamiliar with how home electrical systems work. While flickering lights can stem from a major electrical problem, it is more likely that the issue is related to the bulb or switch. However, it is essential to identify the cause of the flickering lights so you can rule out any serious electrical issues. Learn the most common causes of flickering lights and how to fix them, as well as when it’s advisable to call an electrician. 6 Potential Causes of Flickering Lights Before calling an electrician, try troubleshooting these potential causes of flickering lights. 1. Bulb Issues One of the most common causes of flickering lights is an issue with the bulb. Fortunately, bulb issues are also the easiest fix. Solution: If you suspect the light bulb is burning out, you can easily test your theory by replacing the light bulb. If the new one doesn’t flicker, you’ve likely solved the problem. 2. Switch Issues Light switches see a lot of use. While premium switches may last a lifetime, budget light switches are likely to fail over time. In this case, you might notice the lights flicker when you touch the switch. Solution: If you suspect the light switch is causing the flickering lights, replacing the switch should solve the problem. To do so, turn off the electricity and the circuit breaker box, remove the switch plate, and uninstall the light switch. Wire and install the new light switch exactly like the old one, reinstall the switch plate, and restore the power. 3. Fixture Issues Less commonly, the light fixture itself may be to blame. If there are loose connections or corrosion in the fixture, the lights may flicker. Solution: You can attempt to repair the fixture by fixing the connections or removing corrosion, especially if it’s a premium fixture. However, it may be more beneficial to replace cheaper light fixtures. 4. Incompatible Bulb or Dimmer Switch If you’ve ever shopped for light bulbs, you may have noticed language on the box referring to dimmer compatibility. This is because some types of bulbs and dimmer switches don’t play well together. If you install a light bulb that’s incompatible with the light switch, it will likely flicker as a result. Solution: To ensure your light bulb is compatible with your switch, check the bulb’s specifications before purchasing a replacement. If you’re having trouble finding a light bulb that won’t flicker due to dimmer incompatibility, your best bet is to try a traditional incandescent light bulb. However, they may be difficult to find in some areas due to government restrictions on energy usage. Even LED light bulbs that specify dimmer compatibility can sometimes flicker when tied to a dimmer switch. 5. Wiring Issues Sometimes, the fixture, the bulb, and the switch may all be in good, working condition, but the wiring is to blame for the flickering lights. The wires could be worn or damaged, but it’s more likely that they are loose, causing an intermittent connection, which results in a flicker. Solution: With the power turned off, inspect the wiring and all relevant connections, including those at the switch, circuit breaker, and light fixture. 6. Electrical Load Issues If you notice the lights flickering whenever other appliances turn on, such as a vacuum, dishwasher, blow dryer, or other power-hungry products, it’s likely because you’re running them on the same circuit as the lights, causing an excessive electrical load on the circuit. Whenever these devices turn on, they draw a large amount of power, which causes the current running to the lights to fade, resulting in flickering. Solution: If the circuit is overloaded, move the high-power appliance to a different circuit. For something like a blow dryer or vacuum, unplug it and plug it into a different outlet. Install a dedicated circuit for large, permanently installed appliances, such as dishwashers. When It’s Time to Call a Professional Electrician If none of these solutions resolve your flickering lights or if the lights are accompanied by buzzing sounds, burning smells, heat around the fixture or outlets, or frequently tripping breakers, contact a professional electrician immediately. You should also consider professional help if multiple lights in your house are flickering and the issue isn’t isolated to a single fixture or circuit. If you haven’t already, a professional will likely instruct you to cut the power at the breaker until the problem can be remedied.

    Share this page
  • | |

    B.C. beach named among world’s top 50 in new ranking

    The Western Family Summer Guide is here to make summer fun and easy! Whether you’re having a BBQ, going on a picnic or road trip, planning a backyard dinner, or throwing an ice cream party, we’ve got everything you need to make this summer the best one yet. Turns out, one of the world’s best beaches isn’t in the tropics, it’s right here in B.C. Chesterman Beach in Tofino just landed at #16 on Big 7 Travel’s freshly released list of the 50 Best Beaches in the World for 2025, and it was the only Canadian beach to earn a spot. EB Adventure Photography/Shutterstock This isn’t Chesterman’s first time in the spotlight. It’s been recognized in one of our recent pieces on dog‑friendly summer getaways and has earned global praise in Lonely Planet. While it’s not Blue Flag certified (a designation awarded to beaches meeting strict environmental and safety standards), it continues to attract international praise. With over 2.7 kilometres of white sand connecting North and South Chesterman, the beach is a dream for surfers, dog walkers, storm watchers, and anyone in search of salt air and solitude. SL-Photography/Shutterstock At low tide, a natural sandspit known as a tombolo reveals itself, linking the shore to nearby Frank Island, a local favourite for scenic strolls (though visitors should note the island itself is privately owned). According to the City of Tofino’s website, Chesterman is easy to access by foot or bike via the Multi-Use Path (MUP), or by car, with pay parking and facilities available at Lynn Road (North) and Chesterman Beach Road (South). Public washrooms, showers, and even designated beach fire zones (subject to seasonal restrictions) make it a year-round crowd-pleaser. Big 7 Travel’s annual beach ranking is based on past media acclaim, social media buzz, and editorial insight. This year’s top picks span far beyond Canada’s coastline, from secluded island coves to tropical showstoppers. Here’s a look at the 2025 top five: 1. Whitehaven Beach, Australia Tanya Puntti/Shutterstock Situated on Whitsunday Island in Queensland, this 7  km strip is famous for its brilliant-white sand made of over 98 per cent pure silica, which stays cool even under the hot sun, part of a protected national park within the Great Barrier Reef Marine Park. 2. Anse Source d’Argent, Seychelles ByDroneVideos/Shutterstock Sometimes called the world’s most photographed beach, this stunning coastline on La Digue features dramatic granite boulders, powder-white sand, and crystal-clear turquoise water, protected by coral reefs. Access is via the L’Union Estate, which charges a nominal fee. 3. Ksamil Beach, Albania S.Tatiana/Shutterstock Dubbed the “Maldives of Europe,” Ksamil Beach is celebrated for its calm, crystal-clear waters and small island islets, making it ideal for a relaxing swim or an espresso by the sea. It’s one of the fastest-rising tourism gems on the Albanian Riviera, drawing global attention. 4. Reethi Beach, Maldives Uryutova Elena/Shutterstock Accessible only via seaplane or speedboat, this private island resort in Baa Atoll is known for its coral reefs, overwater villas, and commitment to sustainability. Reethi Beach Resort is located in a UNESCO Biosphere Reserve and is recognized for its efforts in sustainable tourism. 5. Plage de Notre Dame, France D.Bond/Shutterstock Tucked away on Porquerolles Island off the southern French coast, this secluded Mediterranean beach features calm, clear water and a gentle, pine-lined shoreline, ideal for a tranquil day in nature, away from tourist crowds. Have you visited Chesterman Beach in Tofino? Let us know in the comments. Want to stay on top of all things Vancouver? Follow us on X

    Share this page
  • | | | |

    3 Things I Learned Hanging Grasscloth Wallpaperand 1 Big Mistake to Avoid

    Grasscloth wallpaper is notoriously difficult to install. Real grasscloth wallpaper is made from natural fibers like jute, hemp, arrowroot, or seagrass, which are handwoven and backed with paper. The organic construction is super fragile (it tears more easily than vinyl or synthetic papers), and the natural fibers actually absorb adhesive and moisture, which poses the risk of staining or warping. On top of that, grasscloth wallpaper is super difficult to trim because the natural fibers fray when cut, making clean edges very hard to achieve. You also only have one chance to apply it to the wall, as  repositioning can stretch or damage the delicate paper backing and fibers. Now, I have my fair share of experience installing wallpaper. That said: If you’re not experienced with wallpaper, definitely call a professional before attempting grasscloth. Call me crazy, but I actually love putting up wallpaper. I’ve installed almost every kind: ultra-patterned, textured vinyls, peel-and-stick—you name it. But I’ll admit, I was nervous to attempt grasscloth. I knew it can be finicky (and I can be a little clumsy) but I figured that I’m relatively experienced with wallpaper, so I’d give it a shot. Here are the top 3 things I learned—plus one huge mistake to avoid. Key Takeaways Real grasscloth wallpaper, made from natural fibers like jute or seagrass, is extremely fragile and sensitive to moisture, paste, and pressure. Prep and precision are everything: successful installation depends on meticulous preparation. Patience pays off (but it’s not for beginners). Even for an experienced wallpaperer, installing grasscloth was time-consuming and mentally taxing. Credit: David Tsay 1. Do: Paste the Paper and the Wall Most grasscloth wallpapers will call for the paste the paper method, where you apply the paste directly to the back of the wallpaper. Actually pasting the grasscloth is probably the stickiest part of the process, figuratively and literally. You need to find the sweet spot. Too much and you risk it seeping out the seams and staining the edges, but you need enough to make the wallpaper pliable and have it actually stick to the wall.  To get the right amount, I used a foam roller to apply the paste (I used Roman’s Ultra-Premium Clear Pro 880), then used a brush to do the edges. I made sure to apply enough that the wallpaper would actually stick to the wall, but not too much that would pool under the paper. Evenly spread coats are key; avoid leaving spots with excess, pooling paste. This will create problems later on. After I booked the panel (a common paste-the-paper step that allows the wallpaper to absorb the paste and expand before being hung on the wall) I used the roller to apply a small amount of paste (I’m talking an ultra-thin layer) to the wall. This way, I knew my seams would be well-covered and hopefully avoided the need to go back and re-paste the edges. It also gave me a little bit more “give”, letting me very gently slide the wallpaper in place without risking stretching or tearing it. Once its up, use a wallpaper roller (not a flat smoothing tool, which can damage the paper) to smooth it out. Cut the overage with a super sharp knife. If you have any paste that comes out of the sides, use a paper towel to wipe it out and away from the wallpaper. Do not let any paste touch the front of the paper as it’s impossible to remove. Related 2. Do: Cut Before You Paste Regular wallpaper (not grasscloth) is usually quite pliable and easy to cut. Grasscloth is not. It’s very (very, very) difficult to work around beams, doorways, and corners. That said: I recommend cutting the wallpaper panels to size before you paste them to the wall. This crucial step seems like a headache but will save you so much time in the long run. Use super sharp, clean scissors to cut the wallpaper panels, then use a very sharp knife to trim the edges once it’s up. If you’re working in an inside corner, cut two separate panels that join together. (However, if you’re wrapping around a corner, work with a single large panel.) Make sure your knife always stays sharp as you work. Dull knives risk damaging the paper and make for messy, frayed edges. 3. Do: Plan Panels Before You Start Unlike regular wallpaper, grasscloth is not all the same. Because its handmade from natural fibers, every single roll is different and color can vary from one roll to the next. That said, plan your roll transitions carefully. When you’re wallpapering a large focal wall, use as much of the same roll as you can, with the main panels coming from the same roll. If you were to use one panel from one roll and another from the next in the center of a focal wall, you risk a major color difference right in the middle of the room. While these natural imperfections and color variations are the draw, beauty, and charm of grasscloth, it’s still important to make sure the final look feels cohesive.  Try to plan your room so that you’re transitioning from roll to roll in inconspicuous areas like corners or behind curtains or pieces of furniture. That way, a major color difference or seam ins’t as noticeable. While we want to be able to see each individual panel and the natural changes, major variations

    Share this page