5-summer-habits-that-might-be-spiking-your-utility-bills-(and-what-to-do-instead)
| | |

5 Summer Habits That Might Be Spiking Your Utility Bills (and What to Do Instead)

ByStan S.

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

Summer weather is ideal for enjoying the pool, the yard, and the sun, but after being outside for a few hours, it can also be a great relief to step into an air-conditioned home. These hot temperatures often cause many homeowners to adopt certain habits that are more wasteful than helpful.

In an attempt to escape the heat, keep the house cool, and maintain the lushness of the yard, it can be all too tempting to try things that actually increase utility bills, costing you more in the long run for minimal relief. Use this guide to discover what summer habits secretly spike utility bills and what to do instead.

Scott Levene is the vice president of Levco, a fuel and HVAC solutions company. He is also a licensed HVAC professional with nearly 20 years of experience.

Read on to discover the ways you might be increasing your monthly bills without even realizing.

1. Cooling Unused Areas of the House

Air conditioners help to cool down the home, but when you aren’t actively using specific rooms, there is no need to keep the doors open to these areas of the home. Central air conditioning systems might still provide some cooling to these areas through the ductwork, but ultimately, the cooling capabilities will be more focused in the central areas of the home where the thermostat is typically located.

Closing certain doors allows the temperature to drop more effectively in the areas you are actually using, while saving energy. This particular trick works incredibly well for window and standing air conditioners, since their output is already focused in a single area of the home.

2. Running Fans 24/7

Fans can help move cool air throughout the home and provide direct relief to individuals who are near the fan. However, fans do not actually cool down the house, and their continuous operation can even add heat to the house. “A common habit is leaving fans on in empty rooms. Fans cool people, not rooms, so leaving them on when no one’s around just adds to the electric bill without any benefits,” says Scott Levene, vice president of Levco and licensed HVAC professional.

3. Frequent Lawn Watering

Watering the lawn frequently might keep the grass looking lush and the gardens blooming nicely, but it is also a huge use of water that will drastically increase the cost of your water bill throughout the summer. In some areas, watering the lawn and yard might even be against local regulations due to droughts and water conservation efforts. Instead, it’s best to consider possible alternatives that can avoid waste and help save on your water bill.

4. Running the Air Conditioner with the Windows or Doors Open

Many homeowners know to turn off the air conditioner if they are opening a window or door. However, this same knowledge might not be as obvious to other people living in the home, like children or teenagers. Additionally, some adults might open the windows on cooler evenings to bring in fresh air, but then forget to turn the AC off, which increases energy waste and leads to higher energy bills.

5. Setting the Thermostat Temperature Too Low

Unfortunately, just because you turn the thermostat temperature as low as possible, this does not increase the speed at which the home will be cooled, though this doesn’t stop many homeowners from trying year after year. “The most common habit we see is turning the thermostat down too low, thinking it will cool the house faster. Setting the thermostat to 65°F instead of 75°F doesn’t make it work any faster; it just makes the system run longer and work harder, which drives up utility bills,” explains Levene.

How Do These Habits Burn Your Budget?

Deciding to put a stop to these habits and making the switch to a more budget-friendly alternative will help keep more money in your wallet and reduce waste. “The examples listed might only cost a few extra bucks a day, but that adds up over time,” Levene says. “Additionally, the extra strain on the HVAC system causes faster wear and tear, which can shorten the lifespan of the equipment. Frequent repairs or premature replacement costs are a major expense.”

7 Budget-Friendly Alternatives to Beat the Heat

The more unnecessary warm-weather habits you tend to do each year, the higher the cost of your energy bills and the larger your ecological footprint, which is reflected in water and energy waste. Instead, work toward adopting budget-friendly habits that can both keep you cool and reduce your spending this summer season.

1. Use a Programmable Thermostat

When you have a regular thermostat, it’s your responsibility to change the temperature throughout the day and when you leave the home. “Set your thermostat to a reasonable temperature. We recommend 76°F to 78°F when you’re home and 78°F to 80°F when you’re away,” Levene says. With a programmable thermostat, you can simply set a specific schedule based on when you leave for work, when you typically go to sleep, and when you wake, so you can reduce energy waste without even thinking about it.

2. Set Up a Rain Barrel

Constantly watering the lawn is a huge waste of water, and it can quickly add up on your water bill. Instead, use one or more rain barrels in the yard to catch and collect rain. The collected water can then be used for watering the lawn and garden, reducing your spending and your water waste, while still keeping the lawn and garden looking great throughout the summer.

3. Properly Seal the Home

A simple step to benefit you both in the summer and the winter is sealing up any gaps or cracks around the windows and doors. “Use weather stripping and caulk to close up air leaks around doors and windows,” suggests Levene. After completing this process properly, you shouldn’t have to worry about it for at least a couple of years, allowing you to enjoy the benefits of a properly sealed home without actively doing anything.

4. Plant Shade Trees Near Sun-Facing Windows

A great way to help keep the home cool throughout the warmer months of the year, while also adding to the aesthetic appeal of the yard, is to plant shade trees near sun-facing windows. These trees look pretty and reduce the amount of direct sunlight that enters the home, allowing the house to remain cooler during the summer. And if you go with trees that drop their leaves in the fall, you can still get ample sunlight through these windows during the colder months of the year.

5. Use Blinds and Curtains Effectively

If you don’t plant shade trees to help keep out the sun, you can make use of blinds and curtains to perform the same task. “Keep blinds or curtains closed during the hottest part of the day to help block the heat from the sun,” Levene says. Then, once the sun goes down, you can open the blinds and curtains at night to allow cooler air to circulate through the home, improving natural ventilation. Just make sure to turn off the AC if you decide to open the windows or doors at night.

6. Turn Fans Off When You’re Gone

Fans are great for moving air around a specific area and providing relief to individuals nearby, but when no one is home or in the same room with the fan, keeping the fan on is simply a waste. “Using fans with your AC is helpful, but be sure to turn them off when you leave to avoid wasting energy,” mentions Levene. This includes desk fans, standing fans, and ceiling fans; otherwise, you are simply using energy to push some air around the house without any discernible difference beyond increasing the cost of your electricity bill.

7. Run Major Appliances During Off-Peak Hours

Major appliances, like the clothes washer, dryer, dishwasher, and even the oven and stove, tend to use a lot of energy compared to smaller appliances, like a toaster or coffee maker. To reduce energy bills, it’s recommended to run these larger appliances during off-peak hours. “Avoid using your oven during the hottest part of the day; cook outside on the grill if you have one instead,” Levene suggests.

Share this page

Similar Posts

  • | | | | |

    How to Seal Windows and Reduce Energy Bills

    ByStan S.

    Poorly sealed windows allow heat to enter your home during the summer and cool drafts during the winter. As a result, your HVAC unit works overtime to maintain your desired temperature, leading to high energy bills. Here, we explain how to seal windows with various materials and methods including caulk, weather stripping, plastic shrink-wrap, and draft stoppers. While replacing your windows with new energy-efficient ones is the most effective way to stop the draft and lower your utility bill, it’s not always an option. Luckily, there are several ways to seal your existing windows to help prevent air transfer between the interior and exterior. Caulk Around the Windows Caulking around windows is sometimes all it takes to reduce their draftiness. It’s also one of the most cost-effective ways to seal a window, as caulk is relatively inexpensive. Caulk is ideal for filling small cracks around various window components. It can create a watertight and airtight seal that remains flexible for years after application. This flexibility ensures the caulk’s seal won’t crack due to natural expansion and contraction. If your window has gaps larger than 1/2 inch, caulk may not work well. If these gaps are deep, expanding foam insulation designed for window and door use may be necessary to fill the cavity. Once the foam is fully expanded, you can trim it flush using a sharp knife and cover it using a wood trim piece or a bead of caulk, whichever is more appropriate for your window. Install Weather Stripping Weather stripping is useful for sealing around the moving components of a window, such as beneath a moving sash. Whereas caulk will seal the joint, weather stripping allows you to open and close the window, sealing the gap tightly once the window is closed. Most foam weather stripping has one sticky side so it can be adhered to the fixed portion of the window without sticking to the moving one. To promote a strong bond between the foam weather stripping and the window sash, remove dust or debris, thoroughly clean the window with a degreaser, and dry the surface. Seal with Plastic Shrink-Wrap To create a temporary airtight seal around your window, look for plastic shrink-wrap window insulating kits, which include double-stick tape and sheets of plastic shrink-wrap. To seal a window using plastic shrink-wrap, follow these steps: Clean the window. Apply strips of double-stick tape on all four sides of the window frame. Cut the plastic sheeting slightly larger than the window pane. Place it on the pane, pressing it against the double-stick tape to secure it. Use a hairdryer or a heat gun on low to shrink the plastic, starting on the perimeter and moving across the shrink-wrap until it’s perfectly taut. Clean up the excess plastic using a utility knife. If you’re planning to shrink-wrap all of your windows, leave at least one window in each room uncovered for a potential fire escape. Insert Draft Stoppers Store-bought draft stoppers can be great for stopping drafts with minimal effort and without altering the window. There are various styles of draft stoppers tailored for different types of windows and doors. Many draft stoppers include two tubes that can be cut to the window’s width and then slid inside a piece of fabric. The fabric is then slid beneath the window sash. Once the window is closed, the two tubes are tightly held on each side of the window. While this style of draft stopper can be effective for windows, they are often used on doors. A more effective style of a window draft stopper is designed to stick along the bottom edge of the window sash. Once the sash is closed, the overhanging rubber material compresses against the window frame to prevent airflow. The most effortless style of draft stopper that can be used to reduce a window draft looks like a long pillow. You simply lay it at the bottom of the window to block the draft. How to Identify a Drafty Window If the source of your window draft isn’t obvious (such as a visible crack), it can be hard to pinpoint where the issue lies. Here are some useful ways to identify a window draft. Turn off any fans and other air movers. You may have difficulty identifying your draft because air is moving from sources like fans, dehumidifiers, HVAC systems, and more. Light a candle and place it next to the window. Blow the candle out and watch the smoke. The candle smoke will blow if it’s positioned near the draft. This method may take a few tries and it can be helpful to trace the window’s border with the candle. Some lightweight curtains will move when blown by a window draft. Drafty windows are prone to condensation buildup. If you have just one window with condensation on it, there’s a good chance it’s the source of the draft.

    Share this page
  • | | | | | |

    Nearly 4,300 properties in Broadway Plan and Cambie Plan areas to be proactively rezoned by the City of Vancouver

    ByStan S.

    The City of Vancouver is moving forward with a sweeping proposal to proactively rezone thousands of properties in the Broadway Plan and Cambie Corridor Plan areas, as part of an ambitious effort to streamline the development process and boost housing supply near existing and future SkyTrain stations. In next Tuesday’s public meeting, City Council is expected to endorse City staff’s recommendation to refer bylaw amendments to a future public hearing for deliberation and final decision, which would likely be held in September or October — after the forthcoming summer break. This follows City staff’s public consultation beginning in March 2025, when they first announced the proposal. In an interview with Daily Hive Urbanized early this year, Josh White, the City of Vancouver’s general manager of planning, urban design, and sustainability and director of planning, also outlined many of these forthcoming changes. More details have now been released. If approved by City Council later this year, this would introduce standardized zoning for low-rise, mid-rise, and high-rise residential buildings — generally aligning with the existing prescriptions and stipulations of the property’s location under the Broadway Plan or Cambie Corridor Plan, while also considering more recent economic and financial viability factors. Generally, R3 zones would allow low-rise apartments up to six storeys — or eight storeys with affordable housing, and a floor area ratio (FAR) density of a floor area up to three times the size of the lot. R4 zones would support mid-rise buildings, typically around 12 storeys and a FAR density of up to 4.0. R5 zones would permit high-rise towers up to 22 storeys and a FAR density of up to 6.5, depending on the proximity to SkyTrain stations and affordability requirements. It is noted that FAR densities will be retained, but a more generous maximum building height will be considered to accommodate a greater range of design approaches due to varying site conditions and on-site public spaces and landscaping. Through such City-initiated rezoning over large swaths of neighbourhoods, this eliminates the need for property owners, developers, and builders to submit an individual rezoning application for their project. Instead, such projects on a City-initiated rezoned site can go straight to the development permit application, which will save applicants costs related to City fees and hiring architects and consultants to achieve the rezoning regulatory step, as well as reducing opportunity costs and added construction costs from inflation as a result of a longer timeline. City staff estimate that these blanket zoning reforms over the qualifying properties will shave 12 to 15 months off the overall development timeline. As well, this will reduce City staff’s time set aside for reports and public hearings with City Council, enabling them to reallocate resources to other tasks and priorities. So far in 2025, rezoning applications in the Broadway Plan and Cambie Corridor Plan account for about 40 per cent of all public hearings. In sites where a tower form is permitted and complex site conditions also exist — such as tower per block limit policies, building shadowing considerations, and contaminated soils, a “rezoning-to-district” process would still be required. This rezoning-to-district process would be streamlined and shorter than the standard rezoning process. The overwhelming majority of these properties are located within the Broadway Plan area, specifically sites closest to the Millennium Line’s future stations on the Broadway extension, as well as southern areas within the area plan. For the Cambie Corridor Plan area, the properties are clustered near the Canada Line’s Oakridge-41st Avenue Station. In total, the City-initiated rezoning would apply to 4,294 parcels across the Broadway Plan and Cambie Corridor Plan areas. City of Vancouver City of Vancouver City of Vancouver Over the last few years, the municipal government performed some notable City-initiated rezonings of large single-family neighbourhood areas in the Cambie Corridor Plan, enabling more expedited townhouse developments as already prescribed by the area plan. However, the forthcoming changes are the largest standardized rezoning in Vancouver’s history, and align with the Government of British Columbia’s legislated requirements for the City and other municipal governments. This specifically aligns with provincial legislation relating to transit-oriented development at designated Transit-Oriented Areas and other regulatory changes. As well, through these changes, the City will standardize affordable housing requirements using newly enabled provincial inclusionary zoning powers. Additionally, the real estate industry and provincial officials have called individual site-specific rezoning applications as redundant if the proposed uses and built form are already enabled by an area plan. In addition to aligning with the Broadway Plan and Cambie Corridor Plan, the changes also follow the City’s 2022-approved Vancouver Plan. While there was strong support for the initiative during the public consultation earlier this year — especially for its potential to speed up much-needed housing — concerns were raised about neighbourhood character, infrastructure capacity, and construction impacts. City staff responded by noting that all developments will still undergo design review, and there will still be an opportunity for public input at the development permit application stage. Enhanced tenant protections will remain in place for areas with existing rental housing. A time-limited approach will allow current rezoning applicants to transition into the new zoning framework without redoing tenant relocation plans, as long as they submit development permits within one year of bylaw enactment. Currently, there are about 40 in-stream rezoning applications involving Tenant Relocation Plans within the proposed City-initiated rezoning areas. It is noted that some of these project applicants may withdraw their

    Share this page
  • | | | | | |

    5 Popular Home Projects You Should Skip This Summer and Save for Winter

    ByStan S.

    Summertime is an excellent opportunity to get a head start on a few home improvement projects, but not every job benefits from the heat and humidity of the season. Bubbling paint, unsafe temperatures in the attic, and waiting for more comfortable working conditions are all reasons you should consider putting off certain jobs this summer. And before you think you’re off the hook from any DIY renovations this season, we rounded up a few that are worth focusing on now, while the weather is warm and favorable for outdoor work. Ron Shimek is the president of Mr. Handyman, a Neighborly company, a leading provider of property maintenance, repair, and improvement services. 5 Projects to Skip This Summer and Save for Winter Ron Shimek of Mr. Handyman shares his top picks for home improvement to-dos that are better left for winter. 1. Fixture and Hardware Upgrades While you’re spending time indoors during the winter, you might notice more things about your house that you want to change or upgrade, or you might be looking for quick and easy ways to add more interest, personality, and style to your home. Swapping out your fixtures and hardware can give your home a fresh look in a matter of minutes, and you can stay warm indoors while you work. “Upgrading light fixtures, cabinet pulls, door handles, or even installing smart home devices can significantly enhance your home’s aesthetic and functionality without being weather-dependent,” explains Shimek. 2. Insulation and Weather Stripping Spending time in your attic messing with insulation in the summer is probably the last thing you want to do, but there are other reasons to put off this project until cooler weather arrives. In the winter, you’ll be better able to identify cold spots leaking in from damaged weather stripping and other flaws in your home’s insulation. Additionally, there will be no delay in feeling the effects of a job well done. “You’ll immediately feel the impact of improved insulation and sealed drafts as your home becomes warmer and your heating bills potentially decrease,” says Shimek. 3. Interior Painting Painting the interior of your home during the summertime can come with a few obstacles, one of which is humidity. Moisture is a major culprit in sabotaging paint drying time. When paint doesn’t dry properly, it can lead to bubbles, cracking, and mildew issues if you’re not careful. Although Shimek says some ventilation is needed to help the paint dry during the winter, the lower humidity levels go a long way in getting walls and ceilings dry in a reasonable amount of time. Plus, the home project pro says it’s a great way to give your living spaces a fresh look during a season when you’ll be spending a lot of time inside. 4. Minor Remodels The key here is minor, as you’ll likely spend a lot of time indoors during the winter, so whatever construction you do will likely happen while the whole family is underfoot. It is best to schedule these projects during the winter when the weather can be unstable. “These indoor projects don’t rely on good weather and can significantly improve the comfort and functionality of your home during the months you use them most,” says Shimek. Low-key bath and kitchen remodels are both projects you can move from your summertime to-do list to your wintertime schedule. 5. Dryer Vent and Chimney Cleaning “These are crucial safety projects, especially as you begin to use your dryer more frequently and your fireplace for warmth,” says Shimek. Hiring professionals to clean your dryer vent can reduce your fire risk, while a professional chimney cleaning can prevent creosote buildup. Creosote is a tar-like byproduct of smoke from wood-burning fires that forms on the interior of the chimney. It can be a fire hazard and a health risk. Get these projects squared away early in the season to ensure your home is safe and prepared for the cold weather ahead. Related 5 Projects to Do Instead This Summer When the weather is nice and you are eager for a home improvement project, get a jump on these projects that are ideal for summertime. 1. Exterior Painting Hold off on exterior painting until days when the temperature is warm and the humidity is low. In some areas, particularly in the South, this might mean starting or completing the project early or late in the season, when the weather is moderate. These conditions are ideal for allowing paint to dry properly without cracking, bubbling, or mildew issues, says Shimek. 2. Deck and Patio Refinishing One bonus of the summer heat is how quickly it dries surfaces, like when a sudden summer rainstorm hits and the puddles vanish before our eyes after the sun comes out. It turns out that this phenomenon is also beneficial when it comes to pressure washing, staining, sealing, and sanding patios and decks. Shimek says the warm, dry conditions help the materials dry properly, which means they should last longer. 3. Window and Door Work Consider any window-related projects for another early- or late-season job. “Replacing windows and exterior doors is less disruptive when the weather is mild, as it exposes the interior of your home to the elements for a period,” says Shimek. He also advises replacing or repairing window screens during this time. 4. Gutter Repair and Installation Summer is a great time to repair, install, and clean out your gutters. “With less rain and

    Share this page
  • | | | | | | | |

    8 Patio Furniture Trends Designers Swear by for an Outdoor Escape

    ByStan S.

    Your outdoor space is a part of your home—and it deserves just as much thought and personality as your interiors. “Since the days of COVID, we’ve leaned heavily into outdoor living, and it’s changed the way we decorate our exteriors,” says home style expert Ursula Carmona. To help you bring the same level of intention and style to your backyard, patio, balcony, or porch, we tapped interior designers and experts at leading patio furniture brands. Read on for the patio furniture trends they’re seeing in 2025—and how to bring them to life in your space. Ursula Carmona is a content creator and home style expert. Sandra Smith-Fitzgerald is the senior vice president of merchandising at Frontgate, a home and garden retailer. Lindsay Schleis is a design expert and vice president of business development at POLYWOOD, an outdoor furniture brand. 1. Room Vignettes Think of your outdoor area as a true extension of your home—one with defined zones for how you actually live. “Start by considering the ‘rooms’ you wish to define and how you envision living within these spaces,” says Sandra Smith-Fitzgerald, senior vice president of merchandising at Frontgate. “Will it be a retreat? A place to host gatherings? Or an intimate spot for friends? Integral to outdoor living is the creation of distinct areas—like an outdoor living room, dining zone, relaxing retreat by the pool, or an outdoor kitchen for a complete alfresco dining experience.” Once the layout is in place, add layers of decor. “Don’t be afraid to bring the indoors out—cozy seating, layered textiles, styled vignettes,” says Carmona. 2. Elevate Small Spaces A sprawling patio isn’t a prerequisite for great outdoor design. A small balcony or backyard can shine with the right pieces. “We’re seeing a heightened demand for furniture solutions tailored to small or uniquely shaped living spaces,” says Lindsay Schleis, design expert and vice president of business development at POLYWOOD. “Limited square footage doesn’t have to equate to limited style. Consumers are getting creative to transform a tucked-away corner into a cozy nook with a deep-seated chair or find the perfect dining set to fit their balcony.” Finish the look with layered lighting, potted plants, and textured cushions to maximize comfort and visual interest. Related Credit: Rett Peek  3. Blend Modern with Traditional Modern design isn’t going anywhere—but now, it’s being softened with timeless touches. “New traditional style is about crafting a space that seamlessly bridges classic and modern aesthetics,” says Smith-Fitzgerald. “This results in an environment that is both comfortable and sophisticated, inviting yet cohesive, and—at its core—truly timeless.” Classics like Adirondack and rocking chairs remain evergreen staples, but when paired with streamlined forms and modern materials, they feel fresh and updated. “Blend classic silhouettes and colors with modern ones in furniture or accent pieces,” says Smith-Fitzgerald. “Then add layers of textiles, such as patterns and solids in rugs and pillows to infuse texture, comfort, and a dash of personality.” 4. Extend Patio Season with All-Weather Furniture Summer may be the official patio season for those who live in colder climates, but thanks to all-season furniture, patios and porches are becoming year-round destinations. “Our patios and porches are getting just as much love as our living rooms, which means durability and performance materials are a must,” Carmona says. Schleis is seeing the same: “Homeowners are extending their living spaces outside, where they can host friends and entertain at any time of year,” she says. “For that reason, all-weather dining, lounge, and fire pit table sets continue to grow in popularity.” 5. Design a Kid-Friendly Outdoor Space Outdoor design isn’t just for adults anymore. As more families invest in their exterior spaces, we’re seeing a rise in furniture collections made just for kids. “We launched our kids collection last year and it’s been met with enthusiasm,” Schleis says. “Parents are clearly eager to create comfortable and stylish outdoor areas specifically for their children, mirroring the adult spaces they’ve created.” Credit: Victoria Pearson 6. Infuse Nature into the Aesthetic Designers are embracing earthy tones and organic textures to help outdoor spaces feel grounded and serene. “Nature-inspired palettes and textures bring a sense of calm and relaxation to our busy lives,” says Schleis. “All shades of browns and natural, warm tones allow your furniture to both blend in with the environment while making a statement.” Look for woven accents, wood finishes, and stone-inspired materials that enhance the natural vibe. 7. Go Bold With Art Deco Decor The bold glamour of Art Deco is making a comeback—yes, even outside. Characterized by clean symmetry, curved forms, and metal materials, this iconic design style brings sophistication to patios and porches. “To incorporate Art Deco outdoors, opt for designs that provide a sleek foundation with refined details,” says Smith-Fitzgerald. “Introduce geometric patterns and colors through pillows and rugs and accentuate the area with brass items like lanterns and statuary for understated elegance.” Carmona has seen jewel tones trending both indoors and outdoors. To amp up the color when you’re entertaining, try emerald green cushions, sapphire blue rugs, or ruby red tableware. Credit: David Tsay 8. Play with Patterns Patterns are having a moment outdoors—from florals and stripes to geometric and global-inspired prints. “Seasonal motifs can complement any patio style, infusing fun and personality into your design,” says Smith-Fitzgerald, who says the key to adding pattern without overwhelming your space is balance. “Let these elements shine as focal points, ensuring they don’t

    Share this page
  • | |

    8 Expert Tips to Keep Your Pet Safe During a Natural Disaster

    ByStan S.

    Whether you live in an area prone to tornadoes, wildfires, or earthquakes, having an emergency preparedness plan in place can make all the difference in keeping your family, including your pets, safe. We spoke with pet safety experts to learn exactly what you can—and should—do for different types of natural disasters and what you should keep on hand in case of emergency. Roxana Petzold is the pet services senior program manager at the American Red Cross. Susan Anderson is the senior director of disaster response at the American Society for the Prevention of Cruelty to Animals (ASPCA). 1. Put Together an Emergency Kit Pack a bag to grab quickly if you have to evacuate or shelter. Include enough pet supplies for 7–10 days, including food, water, medications, and bowls. Add a photo of you and your pet in case you get separated. Check expiration dates and update the kit twice a year. 2. Create a Plan There are many circumstances you can’t control, but being prepared is one you can. Build a plan that outlines what you’ll do if an emergency were to occur. Know what kind of natural disasters are most likely to occur in your area and create a plan for each one. Draft additional plans for scenarios like flooding, power or water outages, and house fires. To assist you, use a printable checklist found on aspca.org , then practice your family’s emergency plan. “Everyone should have an assigned role,” says Roxana Petzold, pet services senior program manager at the American Red Cross. “Who’s grabbing which bag? Who’s got the dog?”  3. Download a Pet First Aid App The American Red Cross Pet First Aid app is a great resource for emergencies, including step-by-step instructions for common health and safety issues. You can also connect your vet info and find emergency hospitals and pet-friendly hotels. Keep this on your phone and explore the different resources, so if there is an emergency, you can more easily navigate it. 4. Know What to Do If There’s a Fire If there’s a wildfire and you need to evacuate, your pets should always go with you. That means creating a plan with potential places to shelter that will take pets. Since you can’t guarantee all evacuation sites will accept animals, research this now. Never let your pet near damaged property after a fire, and if air quality is poor, limit time outside.  If the fire is in your house, however, Susan Anderson, ASPCA senior director of disaster response, says, “Don’t go back in to grab your pet, as difficult as this is.” Consider adding a pet alert decal to one of your windows so first responders know there are pets in your home. 5. Practice Taking Shelter for Tornadoes and Large Storms If you need to take cover based on weather alerts and warnings, your pet does too. Go to the lowest level of your home in a room with no windows. After the storm, “Your pet might experience stress, fear, and disorientation. Familiar scents and landmarks might have changed,” Petzold says. Keep pets away from damaged electrical wires and trees, and look for debris on the ground that could be a hazard. Also, be aware that wildlife could have taken shelter in your home. 6. Prepare for a Hurricane or Flooding If local officials issue evacuation orders, follow the same protocol as for a fire. “Never tether pets to a pole or a tree or anything that would prevent them from getting to a safe area,” Anderson says. If you can’t evacuate and there’s a risk of flooding, go to the highest level of your house. After a hurricane or flood, don’t let your pets drink standing water, as it can be contaminated.  7. Be Aware of What to Do If There’s an Earthquake Unlike other natural disasters, earthquakes often happen without warning. If you live in an area where they might occur, it’s important to have large furniture anchored to walls to protect people and animals from falling objects. For any disaster, but especially for earthquakes, identify places in your home where your pet might hide when scared. Additionally, be sure your pets are microchipped and the info is up-to-date.  8. Be Cautious in Extreme Temperatures  “If you don’t want to be outside, your pet shouldn’t be either,” Anderson says. In the cold, put jackets on small or short-haired pets as they have less natural protection. In the heat, test walking surfaces with your hand. If it’s too hot for you, it’s too hot for them. Treat an overheated pet with cooling packs or cold water on the head or armpits.

    Share this page