| | |

Two rental housing towers up to 29 storeys, featuring a grocery store, approved for Robson Street

HOME BUYERS – To get the best exclusive listings visit www.vreg.ca and go to “EXCLUSIVE DEALS”

Read More

The 1500 block of Robson Street in downtown Vancouver’s West End neighbourhood will see a substantial uplift through a new mixed-use rental housing project with substantial commercial retail uses.

The City of Vancouver’s Development Permit Board recently approved GWL Realty Advisors’ (GWLRA) application to redevelop 1525-1555 Robson St. — nearly the entirely city block at the northeast corner of the intersection of Robson and Cardero streets.

Building Permit Applications were subsequently submitted in May 2025 to demolish the 1949-built, two-storey commercial building on the west side (1525 Robson St.) of the development site — formerly home to Jang Mo Jib Restaurant. The development site also includes the 1965-built, six-storey office and retail building mid-block, on the east side (1555 Robson St.) of the site.

Designed by architectural firm Arcadis, there will be two high-rise towers reaching 324 ft. with 28 storeys and 318 ft. with 29 storeys, generating 393 secured purpose-built market rental homes — including 100 studio units, 179 one-bedroom units, 101 two-bedroom units, and 13 three-bedroom units.

The two-storey base podium would be dedicated to commercial uses totalling about 41,000 sq. ft. including a 24,400 sq. ft. grocery store — largely located on the second level, with entrance located at the intersection corner — and about 16,600 sq. ft. of smaller commercial retail/restaurant units, which would activate the building’s ground level with Robson Street.

1525-1555 Robson Street Vancouver rental housing gwl realty advisors

Site of 1525-1555 Robson St., Vancouver. (Google Maps)

1525-1555 robson street vancouver

Site of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

During the Development Permit Board meeting, Matt Shillito, the City of Vancouver’s director of special projects, called this project “much needed” for its significant infusion of rental housing, and highlighted the new major retail uses “along a stretch of Robson that’s looking pretty tired.”

“I think it achieves a lot on a relatively tight site. In terms of the architectural approach, I think it’s very thoughtful. I like the nice kind of compact tower floor plates. I like the way the podium has been kept low profile, nice clean lines, and it manages the slope very efficiently, very effectively,” said Shillito.

“I like the way the podium has been kept low profile, nice clean lines, and it manages the slope very efficiently, very effectively. With the CRUs at the ground level and then the grocery store above, it’s all neatly housed.”

Lon LaClaire, general manager of engineering services for the City of Vancouver, added, “These services are going to be welcome in the area, and I think that the new building is going to be a really great addition to the area.”

But Shillito, while also acknowledging that this is a subjective matter, suggested that the development team should consider the possibility of providing the facade design with a lighter tone, as opposed to the current concept using “very dark” materials, which creates a look that is “a little heavier than it otherwise could be.”

The development permit application was the project’s first and primary approval, as a rezoning application was not necessary, given that the project aligns with existing policies for the site.

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

Most of the discussion over this application during the meeting focused on the dedicated freight/truck loading space required for the commercial uses, particularly the grocery store.

The panel ultimately agreed that the larger and more intensive requirement of Class C loading — creating designated loading space for a large semi-trailer — would not only be unnecessary for a mid-size grocery store, but also challenging given the tight urban environment.

Furthermore, similarly-sized grocery stores integrated into high-density, mixed-use developments in and around downtown Vancouver only have Class B loading spaces, which accommodate smaller single-unit trucks and other medium-sized vehicles. For this reason, the panel agreed to only require a small increase in Class B loading capacity.

With the existing Safeway and Whole Foods Market situated on the city blocks just to the west, this would be the third grocery store in Lower Robson.

Four underground levels would contain over 250 vehicle parking stalls, including 198 stalls for rental housing residents, 20 stalls for residential visitors, and 33 stalls for commercial uses. This is in addition to over 600 secured bike parking spaces.

The total building floor area is pegged at about 324,000 sq. ft., establishing a floor area ratio density of a floor area that is 9.6 times larger than the size of the 33,600 sq. ft. development site. This project falls under the City’s West End Community Plan.

2024 preliminary conceptual artistic rendering of the redevelopment with two towers at the combined site of 1525-1555 Robson St., Vancouver. (GWL Realty Advisors)

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

1525-1555 robson street vancouver

October 2024 artistic rendering of 1525-1555 Robson St., Vancouver. (Arcadis/GWL Realty Advisors)

GWLRA is the real estate investment subsidiary of the Great-West Life Assurance Company, which is one of Canada’s largest private insurance firms.

In March 2024, GWLRA acquired the 16,400 sq. ft. site of 1555 Robson Street from VivaGrand Developments in a deal worth $58 million, according to records. This purchase enabled GWLRA to form a land assembly with its September 2022 acquisition of the similarly sized adjacent site at 1525 Robson St., which was acquired for $62.8 million.

Share this page

Similar Posts

  • | | | | | | | |

    No, You Shouldn’t Run the Washing Machine While Showering. Here’s Why

    Key Takeaways Running the washing machine while showering can reduce water pressure. Both the shower and washing machine draw from the same water line, creating a shortage of hot water. You can adjust your routine or upgrade your system for a better outcome. Doing laundry while showering knocks two things off your to-do list at one time, but is it a smart idea? We’ve all experienced the shocking temperature shift that happens when someone flushes the toilet during a shower—but what happens if you try to shower and do a load of laundry at the same time? We turned to experts for their insights and answers. It turns out, plumbers don’t always recommend multitasking. Here’s what they have to say. Credit: Stacy Zarin Goldberg Multitasking Can Cause Low Water Pressure and Temperature Drops Depending on how your plumbing system was designed, the washing machine and shower might share a water line. “When you step into the shower, and your washing machine is looking for hot water to fill its drum, you’re fighting for the same hot water at the same time,” says Chris Hunter, director of customer relations at ServiceTitan. This is particularly common in homes with 30- or 40-gallon water heaters that are drained quickly when multiple fixtures demand hot water at the same time, says Alex Atkinson, a plumber and HVAC technician at Super Brothers. If your water heater isn’t big enough, or your plumbing doesn’t regulate pressure well, you’ll feel it with cold water, pressure drops, or a totally uneven shower experience.  If this happens often, consider upgrading to a larger hot water heater or a tankless hot water heater; this way, you won’t run out of hot water. You can also consider a pressure-balancing valve in your shower head so that when other hot or cold knobs are turned elsewhere in the house, the pressure of your shower does not change as it equalizes temperature and pressure across all outlets. If you need to run a load of laundry, set your machine to cycle after your shower or run a load of laundry in cold water, which won’t affect your supply of hot water. It Can Also Raise Your Energy Bill “If the washing machine is on the warm or hot cycle, there is no doubt that it is going to be pulling from the same hot water supply that the shower is. That can noticeably reduce the pressure or temperature of the shower. Most importantly, from an energy savings perspective, your water heater is now attempting to recover two draws simultaneously, so it’s less efficient. It may also reduce the lifespan of the unit over the long run,” says Brandon Young, CEO at Payless Power. Related Credit: Greg Scheidemann Pictures What the Experts Recommend Here’s what the pros advise, including one simple fix. • Install a pressure-balancing or thermostatic mixing valve in the shower. That keeps the water temperature steady even when someone flushes or the washing machine runs, says Nick Hendrix, general manager at Kingdom Plumbing. • Install a smart hot water recirculation system with a booster pump to eliminate the waiting, end the waste, and enhance comfort at home. • Check your water heater size. If it’s undersized, you might just be running out of hot water too fast. A tankless unit can solve that for good. • Simply run the laundry after the shower, not during.

    Share this page
  • | |

    Buying with 5% Down: What You Gain (and What You Give Up)

    You’ve got two choices: Save for years to hit 20% down. Buy with 5% down and get in the market now. Both come with baggage. One delays your wealth. The other costs more to build it. If you’re staring down today’s home prices thinking “I’ll never save enough”—you’re not alone. But before you jump into a 5% down mortgage, understand this: Getting in early isn’t free. It just feels like it. Let’s break down exactly how low-down payment mortgages work, where they help, and where they bite you. ⚙️ The Mechanics: How 5% Down Works in Canada Here’s what CMHC and the other insurers allow: Under $500,000? Minimum 5% down. $500K to $999K? 5% on the first $500K + 10% on the rest. Up to $1.5 million? As of December 15, 2024, you can now qualify for an insured mortgage—with the same down payment structure: 5% on the first $500K and 10% on the portion between $500K and $1.5 million. This new $1.5M cap opens the door for more buyers in high-cost markets to enter the game with a smaller upfront investment. And if you put down less than 20%, you’re taking on default insurance—a premium tacked onto your mortgage. That cost? Between 2.8% and 4% of the loan, depending on your down payment. And yes, it’s usually rolled in, which means you pay interest on the insurance too. ✅ What You Gain by Putting Down Less 1. Faster Market Access Waiting to save 20% while home prices climb is like trying to fill a leaky bucket. A 5% down payment gets you in the game now, not 3 years from now when prices are higher and you’re still behind. 2. Insured Mortgage = Lower Rates Lenders love insured mortgages. The risk’s off their books. That means they’ll often give you better interest rates than someone with 20% down and no insurance. 3. Optionality Buying with 5% down doesn’t lock up your liquidity. You keep cash in the bank. And if life happens—job change, relationship shift, whatever—you’re not deep underwater. ❌ What You Sacrifice (and It’s Not Small) 1. Higher Monthly Payments You’re borrowing more. And adding insurance to your loan. That’s a double whammy. The monthly hit is higher—no way around it. 2. More Interest Over Time Bigger mortgage = more interest. Even if your rate is sharper, the total interest paid is higher because your loan balance is bloated. 3. Slower Equity Buildup In the first few years, you’re barely touching principal. Most of your payment feeds the bank. Add that to the higher balance and you’re building wealth at a crawl. 4. Less Refinance Flexibility Insured mortgages restrict your options. Want to pull equity out later? Refinance with a different lender? Good luck. Your flexibility is capped unless you re-qualify and re-insure (if even allowed). 📈 The Power of Leverage: Turning 5% into 20% With 5% down, you’re getting 20x leverage on your money. That means for every 1% the property value increases, you get a 20% return on your initial investment. Let’s break it down: Purchase Price: $300,000 Down Payment (5%): $15,000 If the property value rises 1% to $303,000, that’s a $3,000 gain. Return on your $15,000 down payment? 20% ($3,000 ÷ $15,000) This is one of the reasons homeownership often outpaces renting in the long run. Even modest price increases can significantly boost your equity when you’re highly leveraged. Think about it: If you had to save 100% of the cash to buy the property, do you realistically believe you would ever be able to own a home? Depending on market conditions, the longer you wait, the more ground you could lose. Most people think mortgage default insurance only protects the lender. But it can also protect you. Some insurers offer support programs to help homeowners through temporary financial troubles—like a job loss, illness, divorce, or natural disaster. These programs typically work by: Offering payment deferrals during a tough period Extending amortization periods to lower payments Setting up shared payment plans (where the insurer covers part of the mortgage payment) Adding missed payments to the loan balance (capitalizing arrears) Restructuring mortgage terms to fit a new financial reality For example, Sagen’s Homeowner Assistance Program (HOAP) has helped over 63,000 Canadian families avoid losing their homes, with a success rate of over 90% . Knowing that your default insurance can act as a safety net if unexpected hardships arise can provide extra peace of mind. 🎯 The Real Question Do you want in now—knowing the trade-offs—or do you want to wait, save more, and potentially miss out? There’s no right answer. If your income is stable, you’re staying put for 5+ years, and you’ve stress-tested your budget? 5% down might be a smart move. But if you’re stretching, or banking on appreciation to bail you out? Be careful. A hot market can cool. And higher payments don’t feel so hot when rates jump or life gets messy. Final Take Buying with 5% down is like using a credit card to grab a seat at the wealth table. You’ll pay for it—but you’ll own something. It’s not free. It’s not cheap. But it might be smarter than waiting—depending on your market, your goals, and your risk tolerance. So don’t ask, “Can I buy with 5%?” Ask: “What will it cost me if I don’t?” Then run the numbers. Talk to a real mortgage strategist. And make

    Share this page
  • | |

    Two rental housing towers eyed for Kingsway near Fraser Street in Vancouver

    Nearly four years ago, a rezoning application was approved to redevelop the southeast corner of the intersection of Kingsway and Carolina Street — situated on the southernmost border of the Mount Pleasant neighbourhood of Vancouver — into a six-storey, mixed-use building with 80 secured purpose-built market rental homes. But the project — which was one of the larger rental housing proposals in Metro Vancouver at the time, prior to the current wave of proposals — did not proceed as planned. As it turns out, this is because the project was being redesigned for a much larger mixed-use rental housing concept under the prescriptions and stipulations of the City’s Broadway Plan. A new rezoning application has been submitted to redevelop 602-644 Kingsway and 603-617 East 16th Ave., which entails a larger development site than the original concept — growing the available footprint by 50 per cent to over 30,000 sq. ft. The project is just west of the prominent intersection of Kingsway and Fraser Street. The original north site entails old low-rise commercial buildings, including a former funeral home building, while the addition of a south site includes a surface vehicle parking lot and low-rise residential and commercial buildings. Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Google Maps) Site of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Cancelled 2020/2021 concept: Current condition (top) and 2020/2021 cancelled concept (bottom) of 602-644 Kingsway, Vancouver. (Studio One Architecture) 2025 revised concept: 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) Under the new application, local developer Bonnis Properties has partnered with architectural firm Perkins&Will to pursue a 167-ft-tall, 14-storey north tower and a 276-ft-tall, 25-storey south tower. The proponents are pursuing a new concept with two high-rise towers, after determining that a project with three towers would not meet the minimum tower separation requirements from an adjacent lot on Kingsway. There will be a total of 327 secured purpose-built rental homes, including 120 units in the north tower and 207 units in the south tower. Based on the Broadway Plan’s requirement of setting aside at least 20 per cent of the residential rental floor area for below-market units, there will be 66 below-market rental homes and 261 market rental homes. The unit size mix is established as 152 studios, 47 one-bedroom units, 105 two-bedroom units, and 23 three-bedroom units. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The north and south towers will be physically connected on the second level by a pedestrian bridge over the laneway that separates the two sites, enabling continuous shared amenity spaces between both buildings. Expansive indoor and outdoor amenity spaces will be found on the second level — including landscaped outdoor areas on the base podium rooftops — along with outdoor amenity spaces on the rooftops of both towers. The rooftop of the north tower’s podium also features a 2,900 sq. ft. childcare facility for up to 20 kids, plus outdoor play space. Down below, about 19,400 sq. ft. of retail/restaurant space spread across the ground levels of both buildings will activate the street frontages and a new public plaza. This triangular-shaped plaza space — a public space element passed down from the original concept — will be achieved by repurposing a 70-ft-long segment of East 15th Avenue and median that parallels Kingsway. 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) 2025 concept of 602-644 Kingsway and 603-617 East 16th Ave., Vancouver. (Perkins&Will/Bonnis Properties) The floor plates of both towers rising above the podium are curved to strategically place the structural columns along the perimeter of the floor plates, which serves to optimize the views from the residential units and enable a more efficient unit layout. The exterior design is defined by a 40-60 window-to-wall ratio, with protruding balconies protected by steel picket guard railings. Four underground levels at the north tower site will accommodate 141 vehicle parking stalls, while two underground levels at the south tower site will provide over 600 secured bike parking spaces. Altogether, the project will generate a total floor building floor area of over 257,000 sq. ft., establishing a floor area ratio density of a floor area that is 8.5 times larger than the size of the lot. The site is well served by frequent bus routes along Kingsway, Fraser Street, and Main Street, and about a 15-minute walk from SkyTrain’s future Mount Pleasant Station (intersection of Main Street and East Broadway). Under the Broadway Plan, high-rise tower developments are generally

    Share this page
  • | |

    Eby fires back at Ford over suggestion B.C. would accept 2nd oil pipeline

    By Wolfgang Depner The Canadian Press Posted June 3, 2025 8:26 pm 1 min read 2:31 Are pipelines a realistic part of Carney’s ‘nation-building’ projects? Prime Minister Mark Carney says he wants to quickly approve “nation-building” resource projects in an effort to boost Canada’s economy. David Akin explains whether it’s realistic to see new pipelines built anytime soon, and the challenges in getting other big resource projects approved. B.C. Premier David Eby says he won’t be throwing his support behind a new oil pipeline through the province, dismissing Ontario Premier Doug Ford’s suggestion that Eby would change his mind. Eby says in response to Ford’s remarks on Monday that the publicly-owned TMX pipeline is already running through B.C., and the province doesn’t support lifting the ban on oil tankers off British Columbia’s northern coast. 1:58 Premiers talk possible new pipeline out west He says it’s not his job to tell Ford it’s “extremely unlikely” there will be a tunnel under Toronto’s Highway 401, or tell Alberta Premier Danielle Smith her “vision” for a pipeline connecting Alberta and northern B.C. is “many, many years off” with no proponent in sight. Story continues below advertisement Eby says his job instead is to protect the interests of British Columbia by bringing forward “shovel-ready” projects. 2:17 Danielle Smith’s pipeline push at premier’s meeting gets support from Carney Trending Now Ford had said heading into a meeting between premiers and Prime Minister Mark Carney that he was confident Eby and Carney would “work things out” regarding a second pipeline. Get daily National news Get the day’s top news, political, economic, and current affairs headlines, delivered to your inbox once a day. Eby was speaking Tuesday from Osaka, Japan, on a 10-day trade mission in Asia, and deputy premier Niki Sharma represented B.C. at the meeting of premiers in Saskatoon. &copy 2025 The Canadian Press Sponsored content

    Share this page
  • | | |

    Understanding Insured, Insurable, and Uninsured Mortgages

    When shopping for mortgages, you’re likely to come across terms like insured, insurable, and uninsured mortgages.  These classifications impact the type of property you can purchase, how much you need for a down payment, and the interest rates available to you.  Let’s break down what these terms mean, their requirements, and examples to clarify how…

    Share this page
  • | | |

    6 Ways to Unstick Windows That Have Been Painted Shut

    Credit: Getty Images / Vicki Smith Opening windows that have been painted shut can prove challenging, as dried paint creates a surprisingly strong hold. Whether it was a simple window painting mishap or your home got the “landlord special,” where every surface was covered with layers upon layers of white paint, you’ll need to break the seemingly impenetrable seal that the dried paint creates. To help you get started, this guide explains various methods for opening a window that has been painted shut, along with the necessary safety measures to use. How to Unstick Windows That Have Been Painted Shut To open windows that have been painted shut, you need to break through the paint holding the window shut. While this may sound simple, it can be difficult. Here are a few different effective methods, but you need to choose the one that is right for your situation. For example, if you want to preserve the paint on the window, choose a method that disturbs it as little as possible. 1. Apply Heat A heat gun is useful for warming and loosening the paint bond, which allows you to easily scrape it off the window and remove it from the sash so you can open the window. It can be challenging to pinpoint precisely where to apply the heat, so you should only rely on heat application if you aren’t looking to preserve the surrounding paint. Before using a heat gun, ensure there’s nothing nearby that can be damaged and refrain from using heat on plastic window sashes, as they may warp and melt. 2. Score the Paint With a Multitool Painter’s multitools, such as a 5-in-1 tool, are effective for scoring and cutting out paint that’s holding a window shut, as they’re both strong and sharp. However, the thicker blade might damage the surrounding paint, so choose this option only if you’re looking to replace the surrounding paint. 3. Score the Paint With a Utility Knife If you want to preserve the paint finish while also unsticking the window, scoring the seal with a razor blade or a utility knife can offer the cleanest cut. However, if your paint is old, brittle, or has several layers, it can be difficult to score it cleanly. If this is the case, a heat gun can be effective for warming and softening the paint, allowing you to score it more easily and cleanly. To preserve the paint on the window, avoid applying too much direct heat, as it can cause the paint to bubble and compromise its integrity. 4. Break Deeper Seals With a Putty Knife If you’ve scored the paint along the window sash, but the window still won’t budge, dried paint may have seeped deeper into the sash. To break this invisible paint’s hold, place a thin, flexible putty knife in the gap and lightly tap it with a hammer. Work your way around the window until you’ve fully broken the seal and the window opens. If the window has been painted shut, there’s a good chance it hasn’t been operable for years. To aid in future operation and prevent your window from getting stuck again, apply a spray lubricant, such as silicone spray, to the tracks. 5. Use Wood Shims to Open the Gap As you work your way around the window, slide thin wood shims into the gap to slightly hold the gap open, lightly tapping them into place with a hammer if needed. Be careful not to push the shims in too far, as this may stress the window and could even break the glass. 6. Score the Outside of the Window Still no luck? If you haven’t already, check the outside of the window to ensure it hasn’t been painted shut as well. Window Paint Removal Safety Tips Before attempting to remove paint, take the necessary safety precautions to keep you and those around you safe during the paint removal process. Test for lead paint. Removing lead paint requires a higher level of precaution . Most experts recommend skipping lead paint removal and instead opting for encapsulation, so your safest bet may be to score the paint enough to open the window without removing it altogether. Wear the appropriate safety gear. Whenever removing paint, wear the proper respirator to protect against both particles and fumes. Additionally, wear safety glasses and gloves when working with tools for paint removal. Use caution when scoring paint. Whenever you’re using a blade to score paint, use extreme caution and do so slowly and steadily. Moving too quickly or applying too much force may result in injury or damage to the surrounding materials. Consider masking the glass. When working around windows with hand tools, there’s a risk of broken glass. To protect your windows, consider taping cardboard to cover the glass while you work.

    Share this page